DroneMesh Dual FPV Camera Board V2 // Oepn Hardware
Dual FPV Camera Board
This board was designed for RC Wings and FPV Drones who need dual camera inputs and the ability to turn your Video Transmitter on or off.
Parts Needed
ATTINY85 Needed
https://mouser.com/ProductDetail/Microchip-Technology-Atmel/ATTINY85-20SUR?qs=sGAEpiMZZMvqv2n3s2xjsduPWajY%252B7cdJRpHoyTaTzY%3D
Analogue Video Switch Quad Channel
https://mouser.com/ProductDetail/771-74LVC4066D-T
Transistor Bundle I have
http://bit.ly/2UBYN72
0805 Resistor Book
http://bit.ly/2Dsi9C0
0805 Capacitor Book
http://bit.ly/2DBUYod
-------------------
To Get V1 of the PCB
https://www.pcbway.com/project/shareproject/DroneMesh_FPV_Dual_Camera_PCB__Programmable_.html
Github Page
https://github.com/DroneMesh/Open-Hardware-Dual-Camera-Switcher
DroneMesh Dual FPV Camera Board V2 // Oepn Hardware
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(2)
More by DroneMesh
-
DroneMesh OpenFC Gyro Breakout V2 (MasterClass)
This is a components from my how to design your own flight controller masterclass which can be found...
-
DroneMesh OpenFC Breakout V2 (MasterClass)
This is a components from my how to design your own flight controller masterclass which can be found...
-
DroneMesh FPV Magic Board Nano (Smallest Dual Analogue Video Switcher)
Smallest Dual Camera switching board that Adds 100V NPN transistor with some filtration
-
FPV DRONE LED RACEWARE DIY (DroneMesh)
This is FPV drone Racewire with LED the idea here is to replace the Wires with a PCB board to reduce...
-
DroneMesh Dual FPV Camera Board V2 // Oepn Hardware
Dual FPV Camera BoardThis board was designed for RC Wings and FPV Drones who need dual camera inputs...
-
DroneMesh FPV Dual Camera PCB (Programmable)
# DroneMesh Open Hardware Dual Camera Switcher?I designed this board to fit on most RC airplane and ...
-
DroneMesh FPV Camera Latency Tester
### DESCRIPTIONMatek Regulatorhttp://bit.ly/2VTmxAIArduinohttp://bit.ly/2CnpK2H### TECHNICAL DETAILS...
-
DroneMesh Open Hardware OpenFC F4 Flight Controller (BETA V0.03 TESTED)
### DESCRIPTIONBuild Video will be out once received keep checking back here or my youtube channel (...
-
DroneMesh Open Hardware OpenFC F4 Flight Controller (PLEASE USE V0.03 NOT THIS)
### DESCRIPTIONBuild Video will be out once received keep checking back here or my youtube channel (...
-
DroneMesh Open Hardware OpenFC F4 Flight Controller (PLEASE USE V0.03 NOT THIS)
### DESCRIPTION****** Please Use This One Below ******https://www.pcbway.com/project/shareproject/Dr...
-
RX5808 Pro Diversity FPV Drone Finder V2 (DroneMesh)
PCB Project Based on the RX5808 Pro Projecthttps://github.com/sheaivey/rx5808-pro-diversity### IMPOR...
-
DroneMesh ESC/Motor Tester V1 (Arduino Nano)
### DESCRIPTIONESC/ Motor Tester can be reprogammed as a servo tester### TECHNICAL DETAILS / COMPONE...
-
DroneMesh ESC/Motor Tester V2 (Arduino Nano)
### DESCRIPTIONESC/ Motor Tester can be reprogammed as a servo tester### TECHNICAL DETAILS / COMPONE...
-
DroneMesh FPV Drone Finder V1
### DESCRIPTIONThis is a FPV Drone Finder that will help you locate your quadcopter from its 5.8ghz ...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
