DroneMesh ESC/Motor Tester V1 (Arduino Nano)
### DESCRIPTION
ESC/ Motor Tester can be reprogammed as a servo tester
### TECHNICAL DETAILS / COMPONENTS
2 pin terminal
https://www.banggood.com/20pcs-2-Pin-Plug-In-Screw-Terminal-Block-Connector-5_08mm-Pitch-p-993197.html?p=CS101558118042016088&utm_campaign=mesh&utm_content=tanghao
oled i2c
https://www.banggood.com/0_96-Inch-4Pin-White-IIC-I2C-OLED-Display-Module-12864-LED-For-Arduino-p-958196.html?p=CS101558118042016088&utm_campaign=mesh&utm_content=tanghao
Arudino Nano
https://www.banggood.com/ATmega328P-Nano-V3-Controller-Board-Compatible-Arduino-p-940937.html?p=CS101558118042016088&utm_campaign=mesh&utm_content=tanghao
10K Knob
https://www.banggood.com/5pcs-200V-0_2W-10K-Ohm-Potentiometers-Single-Linear-p-961348.html?p=CS101558118042016088&utm_campaign=mesh&utm_content=tanghao
Voltage Regulator
https://www.banggood.com/5Pcs-Mini-DC-Adjustable-Power-Supply-Buck-Module-Step-Down-Module-p-952402.html?p=CS101558118042016088&utm_campaign=mesh&utm_content=tanghao
### Source Code
https://drive.google.com/file/d/17lcNjEsd3CcL3Dzq69Ukjurg60-6w0Do/view
DroneMesh ESC/Motor Tester V1 (Arduino Nano)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(2)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by DroneMesh
- DroneMesh OpenFC Gyro Breakout V2 (MasterClass) This is a components from my how to design your own flight controller masterclass which can be found...
- DroneMesh OpenFC Breakout V2 (MasterClass) This is a components from my how to design your own flight controller masterclass which can be found...
- DroneMesh FPV Magic Board Nano (Smallest Dual Analogue Video Switcher) Smallest Dual Camera switching board that Adds 100V NPN transistor with some filtration
- FPV DRONE LED RACEWARE DIY (DroneMesh) This is FPV drone Racewire with LED the idea here is to replace the Wires with a PCB board to reduce...
- DroneMesh Dual FPV Camera Board V2 // Oepn Hardware Dual FPV Camera BoardThis board was designed for RC Wings and FPV Drones who need dual camera inputs...
- DroneMesh FPV Dual Camera PCB (Programmable) # DroneMesh Open Hardware Dual Camera Switcher?I designed this board to fit on most RC airplane and ...
- DroneMesh FPV Camera Latency Tester ### DESCRIPTIONMatek Regulatorhttp://bit.ly/2VTmxAIArduinohttp://bit.ly/2CnpK2H### TECHNICAL DETAILS...
- DroneMesh Open Hardware OpenFC F4 Flight Controller (BETA V0.03 TESTED) ### DESCRIPTIONBuild Video will be out once received keep checking back here or my youtube channel (...
- DroneMesh Open Hardware OpenFC F4 Flight Controller (PLEASE USE V0.03 NOT THIS) ### DESCRIPTIONBuild Video will be out once received keep checking back here or my youtube channel (...
- DroneMesh Open Hardware OpenFC F4 Flight Controller (PLEASE USE V0.03 NOT THIS) ### DESCRIPTION****** Please Use This One Below ******https://www.pcbway.com/project/shareproject/Dr...
- RX5808 Pro Diversity FPV Drone Finder V2 (DroneMesh) PCB Project Based on the RX5808 Pro Projecthttps://github.com/sheaivey/rx5808-pro-diversity### IMPOR...
- DroneMesh ESC/Motor Tester V1 (Arduino Nano) ### DESCRIPTIONESC/ Motor Tester can be reprogammed as a servo tester### TECHNICAL DETAILS / COMPONE...
- DroneMesh ESC/Motor Tester V2 (Arduino Nano) ### DESCRIPTIONESC/ Motor Tester can be reprogammed as a servo tester### TECHNICAL DETAILS / COMPONE...
- DroneMesh FPV Drone Finder V1 ### DESCRIPTIONThis is a FPV Drone Finder that will help you locate your quadcopter from its 5.8ghz ...
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
116 0 0 -
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
181 1 1