Description
FPV DRONE LED RACEWARE DIY (DroneMesh)
This is FPV drone Racewire with LED the idea here is to replace the Wires with a PCB board to reduce chanced of damaging motor wires in crash.
Parts needed:
Color LED: http://bit.ly/2kVDCwi
White LED: http://bit.ly/2k9bN3i
Solder Paste: http://bit.ly/2lZSiL0
Tweezers: http://bit.ly/2m1ZHcH
Hot Air Station: http://bit.ly/2WuIARx
Resistors: http://bit.ly/2lYqqae
Video:
https://youtu.be/HST5mYqqzxY
Sep 21,2019
5,036 views
FPV DRONE LED RACEWARE DIY (DroneMesh)
2 Layers PCB 93 x 88 mm FR-4, 1.6 mm, 2, HASL with lead, Purple Solder Mask, White silkscreen
Why buy 4 with you can have 100+ for super cheap.
5036
5
2
Published: Sep 21,2019
Download Gerber file 146
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(2)
- Likes(5)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by DroneMesh
-
DroneMesh OpenFC Gyro Breakout V2 (MasterClass)
This is a components from my how to design your own flight controller masterclass which can be found...
-
DroneMesh OpenFC Breakout V2 (MasterClass)
This is a components from my how to design your own flight controller masterclass which can be found...
-
DroneMesh FPV Magic Board Nano (Smallest Dual Analogue Video Switcher)
Smallest Dual Camera switching board that Adds 100V NPN transistor with some filtration
-
FPV DRONE LED RACEWARE DIY (DroneMesh)
This is FPV drone Racewire with LED the idea here is to replace the Wires with a PCB board to reduce...
-
DroneMesh Dual FPV Camera Board V2 // Oepn Hardware
Dual FPV Camera BoardThis board was designed for RC Wings and FPV Drones who need dual camera inputs...
-
DroneMesh FPV Dual Camera PCB (Programmable)
# DroneMesh Open Hardware Dual Camera Switcher?I designed this board to fit on most RC airplane and ...
-
DroneMesh FPV Camera Latency Tester
### DESCRIPTIONMatek Regulatorhttp://bit.ly/2VTmxAIArduinohttp://bit.ly/2CnpK2H### TECHNICAL DETAILS...
-
DroneMesh Open Hardware OpenFC F4 Flight Controller (BETA V0.03 TESTED)
### DESCRIPTIONBuild Video will be out once received keep checking back here or my youtube channel (...
-
DroneMesh Open Hardware OpenFC F4 Flight Controller (PLEASE USE V0.03 NOT THIS)
### DESCRIPTIONBuild Video will be out once received keep checking back here or my youtube channel (...
-
DroneMesh Open Hardware OpenFC F4 Flight Controller (PLEASE USE V0.03 NOT THIS)
### DESCRIPTION****** Please Use This One Below ******https://www.pcbway.com/project/shareproject/Dr...
-
RX5808 Pro Diversity FPV Drone Finder V2 (DroneMesh)
PCB Project Based on the RX5808 Pro Projecthttps://github.com/sheaivey/rx5808-pro-diversity### IMPOR...
-
DroneMesh ESC/Motor Tester V1 (Arduino Nano)
### DESCRIPTIONESC/ Motor Tester can be reprogammed as a servo tester### TECHNICAL DETAILS / COMPONE...
-
DroneMesh ESC/Motor Tester V2 (Arduino Nano)
### DESCRIPTIONESC/ Motor Tester can be reprogammed as a servo tester### TECHNICAL DETAILS / COMPONE...
-
DroneMesh FPV Drone Finder V1
### DESCRIPTIONThis is a FPV Drone Finder that will help you locate your quadcopter from its 5.8ghz ...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
