|
ESP-PROGEspressif
|
|
|
KiCADKicad
|
ESP32-Based Wireless Smartwatch | LiDAR and WiFi Scanning
This is my “Gateway” smartwatch project! It acts as a compact wireless access key to control all your IoT devices from the comfort of your arm! It also features exchangeable MAC addresses, the ability to scan WiFi networks, has a built-in LiDAR for distance sensing, and provides you with real-time temperature, altitude, humidity, pressure, gas resistance, tilt, and acceleration data.
The watch utilizes ESP-NOW on an ESP32-S3-MINI MCU to quickly broadcast data with ultra-low power consumption. This wireless protocol was chosen over others because of its ability to bypass the traditional WiFi connection setup, which makes the action-reaction time between other devices nearly instantaneous. To communicate within the watch's sensors, the MCU utilizes I2C for multi-addressable communication.
The display being used for this project is a 280x240 resolution 1.69” 262K RGB LCD driven by an ST7789 via Serial Peripheral Interface. Perfect for illuminating high-resolution images. To power it all, I’m using a rechargeable 400mAh Lithium-ion Polymer (LiPo) battery which I’ve slid under the watch band casing. Harnessing its power, the watch can last 14 hours (standard use) with a full charge time of <43 minutes.
If you'd like to know more, this project was documented in detail, completely free and open-source on my website here. Just click "DISMISS" if you get a pop-up!
Thanks for reading!
ESP32-Based Wireless Smartwatch | LiDAR and WiFi Scanning
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(5)
- Kameran Deimling Nov 01,2024
- Akim Schewski Oct 27,2024
- Engineer Oct 08,2024
- Engineer Sep 29,2024
- Engineer Sep 23,2024
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Justin Atkins
- High Precision Thermal Imager + Infrared Thermometer | OpenTemp This is my “OpenTemp” project! It is a highly compact, pocket-sized thermal imager/infrared thermome...
- ESP32-Based Wireless Smartwatch | LiDAR and WiFi Scanning This is my “Gateway” smartwatch project! It acts as a compact wireless access key to control all you...
- Solder Sustainer | Effortless One-Handed Soldering This is my Solder Sustainer v2 project! The predecessor of my first version that I built and designe...
- Solder Sustainer | Effortless One-Handed Soldering This is my Solder Sustainer project! It allows the user to solder with only one hand by directly ext...
-
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-