ESP32 Pico D4 Dev Board
ESP32 Pico D4 project with 0.66" Oled Display This design was an experiment using new to me parts like the ESP32 Pico D4, 14500 LiPo battery, 1mmx1mm RGB led and a metal wifi\bluetooth antenna. It can be powered off of a battery or USB cable. If a battery is inserted and USB cable is plugged in it will charge the battery and power the board. This project was not created for any specific purpose but just an excuse to test out a few new parts. If you come up with an idea for this hardware then just let me know at @mikerankin
Schematic, parts list, gerber files, parts placement map and test code are all available at: https://github.com/mike-rankin/ESP32_Pico
ESP32 Pico D4 Dev Board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(5)
Log in to post comments.
Reply
- 3 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
9usability
-
3creativity
-
7content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
9usability
-
8creativity
-
8content
More by Mike Rankin
-
ST32G030 Development Board
After years of only working with only with Arduino, I made this STM32 dev board. Getting used to the...
-
ESP32 USB-C Power Supply
The Github site to download the code and design files is available here: https://github.com/mike-ran...
-
ESP32 Pico D4 Dev Board
ESP32 Pico D4 project with 0.66" Oled Display This design was an experiment using new to me par...
-
ESP32 IOT Color CoinCell
This ESP32 internet of things dev board with has an accelerometer, 80x160 pixel 0.96" color TFT LCD ...
-
Commodore 64 1541-II Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
137 1 2 -
Easy to print simple stacking organizer with drawers
77 0 0 -
-
-
Modifying a Hotplate to a Reflow Solder Station
1118 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
629 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1406 4 3
