|
|
ESP32-S3-WROOM-1-N16R8Espressif Systems
|
x 1 |
|
arduino IDEArduino
|
ESP32_wroom-1-S3
Our main purpose is to switching ON/OFF by using WIFI or Bluetooth. The rare research on our dev board is we using MOSFET to replace RELAY, Switching Time is faster then RELAY does and it is Isolated from our controller and load. Moreover, our project we got JST PH connector for charging battery 4.2V. When the type C plugin . battery is starting charge and if type C plug out , it's auto switch to battery voltage.
We also have another build in component on our board include 3 RGB, 2 Button and Pin-header GPIO of ESP32-S3.
ESP32_wroom-1-S3
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
Log in to post comments.
More by CHAU CHISANN
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
267 1 3 -
Easy to print simple stacking organizer with drawers
105 0 0 -
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1192 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
675 0 1 -
