|
|
ESP8266MODULES_WEMOS-D1-MINI |
x 1 | |
|
|
ZS-JST-XHP-2-PIN_CPA |
x 2 | |
|
|
JST 4 pin |
x 1 | |
|
|
1k ohm resistor |
x 3 | |
|
|
NPN Transistor |
x 3 |
Esp8266 D1 Mini RGB LED Driver
RGB LED Driver - D1 mini ESP8266
With this simple and easy PCB you can control a 5v Strip Led (or a 5v RGB LED) remotely thanks to an ESP8266 D1 mini.
You can control the RGB strip LED thanks to the 3 transitors protected by 3 1kohm resistors.
There is, also, the possibility to connect a custom physical button connected to the D5 pin of the D1 Mini.
This PCB includes a LED power physical switch that can be easily shortcutted thanks to the pin in the bottom, so you can cut off the power of the LED in an easy way!
The PCB is projected to use JST connectors, so you can connect LED STRIP and BUTTON in a super easy way!
Thats all, a very simple board to control a rgb led strip in a easy way.
Esp8266 D1 Mini RGB LED Driver
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(1)
- Likes(1)
More by Luigi S
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
121 0 0 -
DIY Laser Power Meter with Arduino
172 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
162 0 2
