Fan Controller
In this project I needed a fan controller. But I didn't want to do this with just any components but with as many as possible that I already had at home. So it came to that I control 4 fans with 4 Power Mosfets.
The reason for this project is, that I can control the fans by the temperature. So I can let the fans run as quiet as possible and if it needs more power because of the temperature I can run them faster.
With this PCB I also wanted to find out how small it can be and how good it looks with the Silkscreen. On the pictures you can see that the font is very well readable and even the logo looks very well! ^^
Fan Controller
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
Log in to post comments.
More by Kevin Perillo
-
Commodore 64 1541-II Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
108 0 2 -
Easy to print simple stacking organizer with drawers
58 0 0 -
-
-
Modifying a Hotplate to a Reflow Solder Station
1075 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
613 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1361 4 3
