|
KiCADKicad
|
Gameboy MK0 button and sound interface PCB
Custom button board for Gameboy MK0
After a long time testing and changing things around were finally ready for the, hopefully, final version of the MK0.
This project has been in development for almost two years.
Here you can find the necessary file for you to make your own custom button PCB, which is necessary to finalise the project.
-> optional components you need to order: surface mounted resistors and LED
-> custom 3D printed shell
For the custom 3D check Joseph Ko-Fi:
https://ko-fi.com/josephtomkins
You can find me here and also help support future projects:
www.liinks.co/retrogame.evo
https://ko-fi.com/retrogameevo
You can see more from Joseph here:
www.linktr.ee/josephtomkins
Gameboy MK0 button and sound interface PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
Log in to post comments.
More by Jonas retrogame.evo
-
2024 updated button PCB for GachaSP - clean PCB and LED version
After a long time testing and changing things around were finally ready for the first version of the...
-
2024 updated button PCB for GachaSP - Beskar and LED version
After a long time testing and changing things around were finally ready for the first version of the...
-
2025 PCB for GachaSP - ALPS switch - UNDER TESTING
- UNDER TESTING -This version is not ready yet.After a long time testing and changing things around...
-
Gameboy MK0 button and sound interface PCB
Custom button board for Gameboy MK0After a long time testing and changing things around were finally...
-
Easy DMG102
Test version 1.0 of breakout board to make a DMG102 and add some other mods
-
MacroV_V1 initial test
PCB designed to be used as part of the open source project name MacroV, this will allow to convert t...
-
Modifying a Hotplate to a Reflow Solder Station
202 0 2 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
149 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
412 4 1 -
How to measure weight with Load Cell and HX711
437 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
543 0 0
