|
|
ATMega 328 AU |
x 1 | |
|
|
ESP8266 12E |
x 1 | |
|
|
LCD 16x2 |
x 1 | |
|
|
Resistor 100K 0805 |
x 5 | |
|
|
Resistor 6K6 0805 |
x 1 | |
|
|
Resistor 2K2 |
x 1 | |
|
|
Resistor 1K |
x 3 | |
|
|
Resistor 680R |
x 1 | |
|
|
Resistor (Rx) |
x 1 | |
|
|
Capacitor 22pF 0805 |
x 2 | |
|
|
Capacitor 100nF 0603 |
x 1 | |
|
|
Capacitor 10uF 50V |
x 4 | |
|
|
AMS1117 3V3 |
x 1 | |
|
|
LED 3mm |
x 1 | |
|
|
Socket Female Audio 3.5 mm |
x 3 | |
|
|
Jack Audio 3.5 mm |
x 3 | |
|
|
USB to TTL |
x 1 | |
|
|
USBasp |
x 1 | |
|
|
Sensor SCT-013 |
x 1 | |
|
|
Adaptor AC to AC |
x 1 |
Home Energy Monitoring System
This project can be applied for IoT-based home energy monitoring. The ease of this system can be done through the Blynk application. This project uses Arduino Uno / Nano / Promini and ESP8266 / NodeMCU as data processor and data sender.
Step 1
The first step is burn bootloader using USBasp to pin Miso, Mosi, Sck, Rst, Vcc and Gnd.
Step 2
The second step is sending a program home energy monitoring system using USB to TT. Please click the sample Arduino program and library link below.
https://boredomprojects.net/index.php/projects/home-energy-monitor (Link Referensi)
https://github.com/openenergymonitor/EmonLib (Link Library EmonLib)
Step 3
The final step is to provide the data receiver and sending program to blynk using usb to ttl by activating flash mode. Please click on this link to view the Arduino and ESP12e programs.
https://github.com/TomiMandalaPutra/Home-Energy-Monitoring-system
Full Video
https://github.com/TomiMandalaPutra/Home-Energy-Monitoring-system
Home Energy Monitoring System
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(6)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
2design
-
3usability
-
4creativity
-
10content
More by Tomi Mandala Putra
-
Minimum System 328p + Progremmer (USB Downloader/USBasp)
### DESCRIPTIONThis is board minimum system 328P, using progremmer USB Downloader (USBasp)Suport OS ...
-
Home Energy Monitoring System
This project can be applied for IoT-based home energy monitoring. The ease of this system can be don...
-
IoT Project ESP8266-12E
Temperature and humidity monitoring using DHT11 or DS18B20. Can be applied to the IoT (Internet of T...
-
Datalogger pH and Temperature
Project the pH and temperature measurement system with a data logger technique based on Arduino pro ...
-
4 Digit seven segment (MAX7219)
### DESCRIPTIONDisplay 7-segment 4 digit using MAX 7219 DIP### TECHNICAL DETAILS / COMPONENTS### LEA...
-
USB Downloader USBasp
USB Downloader (USBasp)Componens:ATmega 8Male ISP 2x5Male 2x1 2 pcsResistor 1/2 watt 2k2Resistor 1/2...
-
DUE UNO Minimum System 328P
### DESCRIPTIONDUE UNO is the minimum system board that uses the ATmega 328 P chip. It is equipped w...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
113 0 0 -
DIY Laser Power Meter with Arduino
163 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
156 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
566 0 3
