|
TR1 |
x 2 |
IOT Device with ESP-12
The concept of internet has been accepted since the day it entered human life, but with the technological developments experienced, it has emerged as the internet IoT concept. IoT, which has gained popularity in recent years and is preferred by distinguished researchers.
IoT encompasses everything connected to the internet. It is used to describe objects that interact with each other. In simple terms, the Internet of Things (IoT) refers to the tendency to connect all kinds of physical objects to the Internet. The Internet of Things is used in everything from common household appliances such as refrigerators and light bulbs to medical and wearable devices and even smart cities. Specifically, IoT is a system of physical devices that receive and transmit data over wireless networks without human intervention. This is possible by integrating computing devices into objects with the help of sensors.
In this project, a system that can be monitored from outside has been created.For example, you are engaged in agriculture.There will be water pump or electrical components that you need to control remotely.These components have been stabilized by using Esp-12 in order to be a system that can be monitored and intervened remotely.
Endless thanks to PCBway for their unwavering support as always.
IOT Device with ESP-12

Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(0)

- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Furkan Güçlü
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
161 1 3 -
Easy to print simple stacking organizer with drawers
87 0 0 -
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1135 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
637 0 1 -
-
Nintendo 64DD Replacement Shell
494 0 2 -
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1438 4 3