IceTube Clock Design Ver. 2.2, IV-18, ИВ-18 (Main PCB)
This updated design is based on jarchie’s (John Archie) xmas-icetube clock revision D board. He had incorporated most of the hardware features that I wanted for my new batch of clocks, along with a vastly improved firmware update.
One of the most important hardware improvements for me was the ability to properly drive the IV-18 tube to specifications (providing more even display illumination and preventing cathode poisoning). Some other features of the design are the inclusion of an one wire temperature sensor near the oscillator crystal to provide highly accurate temperature compensation of the crystal frequency, reset pull-up resistor, micro-controller power decoupling capacitor, GPS connection pads, along with an improved board layout while still maintaining physical compatibility with Ver. 1.X board switches and connectors.
https://www.barbouri.com/2020/03/26/updated-icetube-clock-design/
IceTube Clock Design Ver. 2.2, IV-18, ИВ-18 (Main PCB)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(4)
- Engineer Apr 14,2024
- Engineer Jan 04,2022
- Sean McQuilling Nov 07,2020
- Engineer Jun 03,2020
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by YAROSLAV
- Programmer Board: ESP8266 ESP-12 ESP32 for ESP32-WROOM ESP32-WROVER Плата Программатора: ESP8266 ESP-12 ESP32 для ESP32-WROOM ESP32-WROVERПрограмматор: ESP8266/ESP32/ES...
- SDR TRX - Super Puper (synthesizer) Трансивер от US5NCJ SDR TRX "Super Puper"https://ut3mk.at.ua/forum/2-146-1
- SDR TRX - Super Puper (main board) Трансивер от US5NCJ SDR TRX "Super Puper"https://ut3mk.at.ua/forum/2-146-1https://ut3mk.at.ua/forum/...
- Turmlabor nixie clock v2.0, IN-14, ИН-14 Schematics and PCB files for the Turmlabor nixie clock kit.Feel free to build your own nixie clock f...
- IceTube Clock Design Ver. 2.2, IV-18, ИВ-18 (Main PCB) This updated design is based on jarchie’s (John Archie) xmas-icetube clock revision D board. He had ...
- IceTube Clock Design Ver. 2.2, IV-18, ИВ-18 (Side PCB) This updated design is based on jarchie’s (John Archie) xmas-icetube clock revision D board. He had ...
- RGB-LED Raspberry Pi Hat (Version 5) RGB-LED Raspberry Pi Hat (Version 5)Raspberry Pi shield that has support for both SPI-driven DotStar...
- SirMixALot V1.2.1 Flight Controller Fully featured flight controller. Users Betaflight firmware 4.1.2 or higher.BOM filehttps://www.digi...
- Minimalist ESP-8266 temperature, humidity sensor, programmer. Minimalist ESP-8266 temperature/humidity sensor/programmer.This is a Kicad design which uses a PCB U...
- Миниатюрные часы на вакуумно-люминесцентном индикаторе ИВ-21, vacuum indicator IV-21 (part 4 of 4) Миниатюрные часы на вакуумно-люминисцентном индикаторе ИВ-21Автор: *Trigger*Опубликовано 05.04.2016С...
- Миниатюрные часы на вакуумно-люминесцентном индикаторе ИВ-21, vacuum indicator IV-21 (part 3 of 4) Миниатюрные часы на вакуумно-люминисцентном индикаторе ИВ-21Автор: *Trigger*Опубликовано 05.04.2016С...
- Миниатюрные часы на вакуумно-люминесцентном индикаторе ИВ-21, vacuum indicator IV-21 (part 2 of 4) Миниатюрные часы на вакуумно-люминисцентном индикаторе ИВ-21Автор: *Trigger*Опубликовано 05.04.2016С...
- Миниатюрные часы на вакуумно-люминесцентном индикаторе ИВ-21, vacuum indicator IV-21 (part 1 of 4) Миниатюрные часы на вакуумно-люминисцентном индикаторе ИВ-21Автор: *Trigger*Опубликовано 05.04.2016С...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
128 0 0 -
DIY Laser Power Meter with Arduino
190 0 2 -
-
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
171 0 2 -