Voon-Li CHUNG
AUSTRALIA • + Follow
Edit Project
Description
Jam Electronic Timer (JET): Compact Edition
A version of the P8 Jam Timer (JETT) designed to have all electronics (except a single horn speaker) contained in the main enclosure.
Hardware has been simplified somewhat, but still uses the same Arduino firmware as its predecessor. The audio amplifier in the original has been replaced by a TDA3116D breakout board with minor modifications:
- Remove and short C9
- Remove and short C10
- Connect Left Input to GND (performed on the PCB)
- Replace R2 with 75K
- Replace R3 with 47K
- Remove R1
Sep 12,2022
471 views
end-flag
Jam Electronic Timer (JET): Compact Edition
A version of the P8 Jam Timer (JETT) designed to have all electronics (except a single horn speaker) contained in the main enclosure.
471
0
0
Published: Sep 12,2022
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.

Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW- Comments(0)
- Likes(0)

Upload photo
0 / 10000
It looks like you have not written anything. Please add a comment and try again.
You can upload up to 5 images!
Image size should not exceed 2MB!
File format not supported!
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by Voon-Li CHUNG
-
P6: Penalty Box NFC Reader Sub-Unit The NFC reader unit that is placed on the armrest of the penalty box chair. For use in WFTDA-based r...
-
Jam Electronic Timer (JET) (Timing Beacon) https://outofplayblog.wordpress.com/2022/01/24/jet-jam-electronic-timer/
-
Jam Electronic Timer (JET) The main board for a Jam Timer replacement system for roller derby.https://outofplayblog.wordpress.c...
-
Jammer Ref Gauntlet: Belt Unit Used by Jammer Referees, allows JRs to perform basic SK functions directly by a series of handheld b...
-
Jammer Ref Gauntlet: Hand Units with MX Switches Jammer Referee Gauntlets - hand units using MX (eg. Cherry) switches. By Vector.https://outofplayblo...
-
Jammer Ref Gauntlet: Hand Units with Tactile Switches The hand units for Jammer Referee Gauntlets for Roller Derby. By Vector.You will need two (one for e...
-
Jam Electronic Timer (JET): Compact Edition A version of the P8 Jam Timer (JETT) designed to have all electronics (except a single horn speaker)...
-
P6: Penalty Box Main Unit Main unit for the PET automated penalty box.
-
P6: Penalty Box NFC Reader Sub-Unit The NFC reader unit that is placed on the armrest of the penalty box chair. For use in WFTDA-based r...
-
Jam Electronic Timer (JET) (Timing Beacon) https://outofplayblog.wordpress.com/2022/01/24/jet-jam-electronic-timer/
-
Jam Electronic Timer (JET) The main board for a Jam Timer replacement system for roller derby.https://outofplayblog.wordpress.c...
-
Jammer Ref Gauntlet: Belt Unit Used by Jammer Referees, allows JRs to perform basic SK functions directly by a series of handheld b...
-
Jammer Ref Gauntlet: Hand Units with MX Switches Jammer Referee Gauntlets - hand units using MX (eg. Cherry) switches. By Vector.https://outofplayblo...
-
Jammer Ref Gauntlet: Hand Units with Tactile Switches The hand units for Jammer Referee Gauntlets for Roller Derby. By Vector.You will need two (one for e...
-
Jam Electronic Timer (JET): Compact Edition A version of the P8 Jam Timer (JETT) designed to have all electronics (except a single horn speaker)...
-
P6: Penalty Box Main Unit Main unit for the PET automated penalty box.
-
P6: Penalty Box NFC Reader Sub-Unit The NFC reader unit that is placed on the armrest of the penalty box chair. For use in WFTDA-based r...
-
Jam Electronic Timer (JET) (Timing Beacon) https://outofplayblog.wordpress.com/2022/01/24/jet-jam-electronic-timer/
-
Jam Electronic Timer (JET) The main board for a Jam Timer replacement system for roller derby.https://outofplayblog.wordpress.c...
-
Jammer Ref Gauntlet: Belt Unit Used by Jammer Referees, allows JRs to perform basic SK functions directly by a series of handheld b...
You may also like
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
301 1 3 -
Easy to print simple stacking organizer with drawers
110 0 0 -
-
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1201 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
687 0 1 -