LEV60 55mm PCB custom busbar
Affordable busbars for the LEV60 LiFePO4 cells from Jag35.com
These custom PCB busbars work for the LEV60 LiFePO4 cells Found on JAG35.com
The 1oz copper version can carry around 50A continuous and they can be stacked in multiple layers to add ampacity.
The 2oz copper version can carry around 100A continuous and they can be stacked in multiple layers also.
The 55mm version of this busbar works for arranging cells sided to side like pictured below.
There is a 43mm version that allows you to use the cells end to end Found here.
There's also 4s busbars with balance leads ending on a connector for easy BMS installation here.
Also 8s-24v busbars and 16s-48v busbars available.
LEV60 55mm PCB custom busbar
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Jehu Garcia
-
12v 148Ah 1200A FAT LEV60 Busbar
This project is designed to build an 8cell 12v LiFePO4 battery for car audio. Capable of producing 8...
-
Honda Clarity Battery Module DIY Connector
The Honda Clarity batteries have a proprietary connector, this projects makes a DIY version to use t...
-
200A 12v Lithium Battery BMS project
this project allows you to easily install a 200A BMS on the DIY LEV200 12v LiFePO4 battery.Parts Lis...
-
Cmax 21cell modules Balancer Board
This project is to make a 21cell FORD max/fusion into a 4s5p 14.8v battery for hight performance car...
-
DIY 280Ah LiFePO4 Cells with Studs 90mm apart PCB Busbar
This project helps you build a 12v battery pack using any LiFePO4 cell that is 204mm x 173mm x 72mm ...
-
SLIM 12v SOLAR battery PCB Busbar Kit - LifePO4 EVE 280AH 304AH 314Ah
This project helps you build a 12v battery pack using any LiFePO4 cell that is 204mm x 173mm x 72mm ...
-
Easy 48v SOLAR battery PCB Busbar Kit - LifePO4 EVE 280AH 304AH 314Ah
This project helps you build a 48v battery pack using any LiFePO4 cell that is 204mm x 173mm x 72mm ...
-
BMS ADAPTER for Samsung INR 13S 54 Volt Lithium Ion Battery 20R Scooter and eBike Battery Modules
This project will help you easily Instal a BMS on the Samsung INR 13S 54 Volt Lithium Ion Battery 20...
-
Easy 24v SOLAR battery PCB Busbar Kit - LifePO4 EVE 280AH 304AH 314Ah
Easy 24v SOLAR battery PCB Busbar Kit - LifePO4 EVE 280AH 304AH 314AhThis project helps you build a ...
-
Easy 12v SOLAR battery PCB Busbar Kit - LifePO4 EVE 280AH 304AH 314Ah
This project helps you build a 12v battery pack using any LiFePO4 cell that is 204mm x 173mm x 72mm ...
-
Jeep EV Battery Module retrofit for DIY use
Update: V1.3 now supports the ability to flip around the board and have the connectors on the oppos...
-
Double 3rd Gen Nissan Leaf Battery Module 14.8VDC 3rd PCB Busbar
This project helps you make a PCB busbar for a 3rd Gen Nissan Leaf Battery module. These modules are...
-
14.8VDC 3rd Gen Nissan Leaf Battery Module PCB Busbar
This project helps you make a PCB busbar for a 3rd Gen Nissan Leaf Battery module. These modules are...
-
16v 148Ah LEV60 busbar PCB project
This project is designed to build a 10cell 16v LiFePO4 battery for high performance Car Audio use. C...
-
16v 74Ah LEV60 busbar PCB project
This project is designed to build a 5cell 16v LiFePO4 battery for high performance Car Audio use. Ca...
-
24v 74Ah FAT LEV60 busbar battery project
This project is designed to build an 8cell 24v LiFePO4 battery for RV use. Capable of producing 200A...
-
12v 74Ah LEV60 LiFePO4 PCB Busbar
This project is designed to build a 4cell 12v LiFePO4 battery for car audio. Capable of producing 40...
-
36v 74Ah LEV60 PCB Busbar
This project is designed to build an 12cell 36v LiFePO4 battery. Capable of producing 400A continous...
-
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
199 0 0 -
RGB LED Matrix input module for the Framework Laptop 16
395 0 2 -
-
-
-
