Top
Light Sensing Module
### DESCRIPTION
Light sensor module that outputs a high logic when a light source is shined on the LDR.
### TECHNICAL DETAILS / COMPONENTS
- 1 LP311P (Comparator)
- 1 LDR (.15in pin to pin pitch)
- 2 1206 Package Resistors for calibrating light sensing section.(R1 ,R2)
- 1 1206 Package Resistor for LED.(R3)
- 1 1206 Package LED.(D1)
- 1 Horizontal POT .(POT)
### LEARN / TOPIC / BUILD INSTRUCTIONS
Note: - LED Anode should face R3.
- Output signal can be found on both screw holes on forward section.
Light Sensing Module
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
Log in to post comments.
More by Usmaan Hussain
-
Commodore 64 1541-II Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
108 0 2 -
Easy to print simple stacking organizer with drawers
58 0 0 -
-
-
Modifying a Hotplate to a Reflow Solder Station
1075 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
613 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1361 4 3
