Description
Lonisino Class AB 50w amplifier
Lonisino project,
a simple amplifier with good performance.
Through the videos you can see all the steps I took to create it.
In the future, evolutions of this circuit will be made followed by dedicated videos.
prepare the bias trimmer rotated clockwise, before the first switch-on, then slowly rotate the trimmer anti-clockwise until reaching 30 35mV.
In the first hour of use, check several times that the bias is correct.
As soon as possible I will also make a video on calibration.
Youtube video
Schematic and Layout
Schma Lonisino.pdf
Regolazione bias.jpg
Jan 26,2024
1,332 views
Lonisino Class AB 50w amplifier
Simple 50w class AB amplifier
1332
2
0
Published: Jan 26,2024
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/01/27 (GMT+8)
File update record
2024-01-2704:16:16
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(2)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
-
Amplifier MX5OnisA (THE BLAMELESS AMPLIFIER CONCEPT)
Questa versione di amplificatore è molto simile al "THE BLAMELESS AMPLIFIER CONCEPT"http://www.dougl...
-
Amplifier LoniTip100
Questo amplificatore è il 2° della linea LoniTip100ha una potenza di 100w rmsalimentazione +-45vrego...
-
Amplifier Loni Tip50
Questo amplificatore, il più piccolo LoniTip50ha una potenza di 50w rmsalimentazione +-35vregolazion...
-
Preamplificatore AjeanMos a simmetria complementare
Questo preamplificatore è progettato a simmetria complementare.Il differenziale si compone di una do...
-
ProtoDac DileOnisA TDA1387 x8 R2R DAC a calibrazione continua, per Raspberry
This is a new version of the Protodac. Different from the original only in terms of layout. The dac-...
-
Lonisino Class AB 50w amplifier
Lonisino project,a simple amplifier with good performance.Through the videos you can see all the ste...
-
The gainclone LM3875
The Gainclone LM3875https://phonoclone.com/diy-gc.html
-
Preamplifier RagnaMos 1.5
This preamplifier is built around a small MOSFET, the BS170. The current source is composed of a JFE...
-
LM1875 high current +TIP35+TIP36
This amplifier is based on the LM1875 integrated circuit, which respectively drives a TIP35 and a TI...
-
LM3875 Amplifier
This amplifier is based on the LM3875. The signal ground has been separated from the GND, and a high...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
159 1 1 -
-
