Martin Refseth
NORWAY • + Follow
Components
Description
MBC3 Flashcart | 2x2MB | FRAM | RTC | Revision 1.5
Order at 0.8mm with ENIG!
MBC3 Flashcart based on retroreboot's cartridge that uses 0603 components (while based on the RetroReboot carts, these are completely redesigned from the ground up in kicad)
Revision 1.5 supports 2x2MB flash, which means you can have 2 Roms on one cartridge, the switch is used to swap between the two roms.
Code
Github
https://github.com/HDR/MBC3-Flashcart
Schematic and Layout
Github
https://github.com/HDR/MBC3-Flashcart
Aug 08,2021
8,303 views
MBC3 Flashcart | 2x2MB | FRAM | RTC | Revision 1.5
This is a flashcart for the Game Boy and Game Boy Color with RTC, up to 2x2MB of ROM, and 256kbit of non volatile memory.
8303
8
0
Published: Aug 08,2021
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
Topic
- Comments(0)
- Likes(8)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Martin Refseth
-
Machined DS Cartridge
A machined Nintendo DS cartridge for Original GamesThese are machined replacement housings for origi...
-
Game Boy Camera Flashcart | 2x1MB | FRAM |
Please read the license!What is it?This is a reflashable game boy camera, it uses parts of an origin...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Crystal Clear Edition
This project is based on a flashcart that used the MBC3 chip from a real cart, however the issue wit...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Suicune Edition
This project is based on a flashcart that used the MBC3 chip from a real cart, however the issue wit...
-
DualShock4 USB Type C [JDS-001/JDS-011]
PS4 Controllers, but with USB C
-
Machinable|3D Printable Switch Cartridge
Current revision untested, but should work, order at your own risk.A replacement enclosure for Ninte...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Coral Edition | Advanced PCB
This is the advanced pcb version of these intended for ordering non standard colors or finishes.
-
CR1616 Battery Retainer for Game Boy Advance Games | "Prototype"
Please keep in mind that these are prototypes, i can't guarantee that they will be as reliable as CR...
-
Please check link for updated project
The last project was accidentally shared as a single layer board, please use this link instead https...
-
CR2Retainer | Game Boy Cart battery retainer for CR2025/CR2032 cells
Tabbed CR cells are hard to find in a large part of the world, these flex pcb's let you use standard...
-
Les Paul ZMK-Hero
This is a replacement bluetooth enabled mainboard for Les Paul PS3 Guitar Hero controllers with a 13...
-
Machined Game Boy Cartridge
A Machined Game Boy cartridge for Original games or OEM style FlashcartsOrdering:Front:Make sure to...
-
AGB-E02-20 | Game Boy Advance | Replacement PCB | V2
New in Version 2:Updated Traces to be 1 to 1 with an original boardUpdated Copper Fill to be 1 to 1 ...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Coral Edition
Single post Coral edition of the MBC30 flashcart
-
Mini Game Boy Camera Flashcart | 1MB | FRAM |
Please read the license!
-
Game Boy Cartridge Housing | 3D Printed
"OEM" style cartridge housing, fits original single post games & MBC based flashcarts.
-
MBC5 Flashcart Christmas Tree Edition | 4MB Flash | FRAM
A simple MBC5 flashcart shaped like a christmas tree, should fit an original (or Cloud Game Store) c...
-
MBC5 Flashcart | 2x2MB or 4MB | FRAM | V3
A simple flashcart that uses an MBC5 from an original cartridgeChanges in V3:Added rumble support, t...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
121 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
183 1 1
