|
KiCADKicad
|
MBC5 Flashcart | 2x2MB or 4MB | FRAM | V3
A simple flashcart that uses an MBC5 from an original cartridge
Changes in V3:
Added rumble support, this should work with any original games that used rumble.
Changes in V2:
Added circuitry that fixes issues with certain games
Added a switch that toggles between 2x2MB and 4MB operation (Switch functionality is untested, but should work fine)
Jumper can be bridged for normal 4MB operation if you don't want to use the switch
Order with the following options.
Thickness - 0.8
Solder Mask - Any
Silkscreen - Any
Edge Connector - Optional, might be worth having
Surface Finish - ENIG (Do not order with HASL, the boards won't last)
MBC5 Flashcart | 2x2MB or 4MB | FRAM | V3
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(3)
- Likes(5)
More by Martin Refseth
-
Machined DS Cartridge
A machined Nintendo DS cartridge for Original GamesThese are machined replacement housings for origi...
-
Game Boy Camera Flashcart | 2x1MB | FRAM |
Please read the license!What is it?This is a reflashable game boy camera, it uses parts of an origin...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Crystal Clear Edition
This project is based on a flashcart that used the MBC3 chip from a real cart, however the issue wit...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Suicune Edition
This project is based on a flashcart that used the MBC3 chip from a real cart, however the issue wit...
-
DualShock4 USB Type C [JDS-001/JDS-011]
PS4 Controllers, but with USB C
-
Machinable|3D Printable Switch Cartridge
Current revision untested, but should work, order at your own risk.A replacement enclosure for Ninte...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Coral Edition | Advanced PCB
This is the advanced pcb version of these intended for ordering non standard colors or finishes.
-
CR1616 Battery Retainer for Game Boy Advance Games | "Prototype"
Please keep in mind that these are prototypes, i can't guarantee that they will be as reliable as CR...
-
Please check link for updated project
The last project was accidentally shared as a single layer board, please use this link instead https...
-
CR2Retainer | Game Boy Cart battery retainer for CR2025/CR2032 cells
Tabbed CR cells are hard to find in a large part of the world, these flex pcb's let you use standard...
-
Les Paul ZMK-Hero
This is a replacement bluetooth enabled mainboard for Les Paul PS3 Guitar Hero controllers with a 13...
-
Machined Game Boy Cartridge
A Machined Game Boy cartridge for Original games or OEM style FlashcartsOrdering:Front:Make sure to...
-
AGB-E02-20 | Game Boy Advance | Replacement PCB | V2
New in Version 2:Updated Traces to be 1 to 1 with an original boardUpdated Copper Fill to be 1 to 1 ...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Coral Edition
Single post Coral edition of the MBC30 flashcart
-
Mini Game Boy Camera Flashcart | 1MB | FRAM |
Please read the license!
-
Game Boy Cartridge Housing | 3D Printed
"OEM" style cartridge housing, fits original single post games & MBC based flashcarts.
-
MBC5 Flashcart Christmas Tree Edition | 4MB Flash | FRAM
A simple MBC5 flashcart shaped like a christmas tree, should fit an original (or Cloud Game Store) c...
-
MBC5 Flashcart | 2x2MB or 4MB | FRAM | V3
A simple flashcart that uses an MBC5 from an original cartridgeChanges in V3:Added rumble support, t...
-
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
133 0 0 -
DIY Laser Power Meter with Arduino
209 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
184 0 2
