Here is the PCB needed to build your own Mini Video player from Super Make Something Episode 24!

The build video for this project can be found here: YouTube

A livestream of the full build can be found here that discusses some of the project's other interesting engineering tidbits that did not make it into the above project video: YouTube

The source code and additional build instructions can be found here: https://github.com/SuperMakeSomething/mini-video-player

To build this project, you will also need the following components:

1x ESP Wroom 32 Development Kit (30 pin version): https://amzn.to/3zT9VOL

1x PAM8403 Audio Amplifier: https://amzn.to/3AmsVa8

2x Thumbwheel Potentiometers: https://amzn.to/3dtOYCq

1x PCB Headphone Socket: https://amzn.to/3QgI2at

1x 2W 8 Ohm Speaker: https://amzn.to/3QlU2aT

1x ST7735 LCD with SD Card Slot: https://amzn.to/3bQvFmG

2x Momentary Push Buttons: https://amzn.to/3QKNdiz

1x 2.2k Resistor: https://amzn.to/3w2nN8x

1x SPDT 3 Terminal Slide Switch: https://amzn.to/3w6l1Pp

1x 10uF Capacitor: https://amzn.to/3PgUTYU

1x 16GB SD Card: https://amzn.to/3dqpxSo

1x Lipo Charger + Boost Module: https://amzn.to/3JSrEuo

1x 820mAh Lipo Battery: https://amzn.to/3SQjyqk

3x M3 Button Head Screws: https://amzn.to/3C4wIdm

I used the following tools during the build. If you need any of these, they can be found here:

Hakko FX888D Digital Soldering Station: https://amzn.to/3JRXAim

Digital Multimeter: https://amzn.to/3w6lWiP

Desoldering Wick: https://amzn.to/3C0L1zy

Desoldering Pump: https://amzn.to/3AkJWBt

Tin Lead Rosin Core Solder: https://amzn.to/3SQJj9K

Elegoo Neptune 3 3D Printer: https://amzn.to/3bWweeI

(All Amazon links are affiliate links.)

Note: If you ordered a copy of these PCBs before 9/23/2022, you have a revision that has a silkscreen error for the passive resistor that is part of the volume control circuit. The silkscreen for that revision says that the resistor value is 10K, whereas it should be 2.2K. This is merely a cosmetic issue and does not affect functionality, but a 2.2K resistor should be used in conjunction with the 1K thumbwheel potentiometer in order to create the desired pseudo-logarithmic response for the volume control.