Uni-Byte Labs
CANADA • + Follow
Description
Op-Amp Experimenter Board
A simple little board that takes a standard configuration dual op-amp and allows you make up various different configurations.
The Op-Amp can be any standard pin-out 8-pin dual op amp (TL072, LM358, NE5532, etc..). The only set components are the two 0.1uF bypass capacitors. All other components are depending on the design desired.
Videos:
Schematic and Layout
Schematic
OpAmpX.jpg
Nov 30,2023
606 views
Op-Amp Experimenter Board
2 Layers PCB 85.1 x 79.7 mm FR-4, 1.6 mm, 1, HASL with lead, Blue Solder Mask, White silkscreen
A simple little board that takes a standard configuration dual op-amp and allows you make up various different configurations.
606
1
0
Published: Nov 30,2023
Download Gerber file 4
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Uni-Byte Labs
-
Versatile Linear DC Power Supply Module
A small, simple PCB to build a variety of DC Power Supplies up to 1 Amp. They can be either regulate...
-
Coarse/Fine potentiometer control.
This board implements coarse and fine controls using a single-gang potentiometer (VR1) for the coase...
-
Development board for PICAXE
The Uni-Byte D-Axe IlI is primarily intended as a rapid prototyping tool for PICAXE® 8, 14 and 20 pi...
-
Time Domain Reflectometer
A time domain reflectometer for experimentation and transmission line fault finding.Instruction on t...
-
Op-Amp Experimenter Board
A simple little board that takes a standard configuration dual op-amp and allows you make up various...
-
Class AB Amplifier
Easy to build amplifier with wide bandwidth and very low distortion.Videos:
-
Fast Rise Time Oscillator
A vital piece of test equipment needed in every lab to characterize the bandwidth of testing systems...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
157 1 1 -
-
