OpenDrone PCB
The OpenDrone itself is straight outta 3D printer. The flight controller, a raspberry-pi in our case, is developed in Visual Studio with C++. The OS is Raspbian Stretch Lite. After calculating, the flight controller is fed with the calculated results. The whole drone is controlled with an App. In the App, you can set different markers on a map where, after the markers been set, the drone will autonomously fly to. If you want you can fly manually, too.
Its all Open-Source Check it out on Github
OpenDrone PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(6)
Log in to post comments.
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
3design
-
4usability
-
7creativity
-
10content
More by Engineer
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
222 1 3 -
Easy to print simple stacking organizer with drawers
97 0 0 -
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1177 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
661 0 1 -
