Opentendo famicom pcb
Description This is a schematic of the Nintendo Famicom KW/Clone. This was originally the schematic for the Dendy Junior and Megawalkman JNR-01. I got the initial design from here: https://github.com/mleonid2000/dendy_junior_remastered
For the video block I used a transistor, Megawalkman version. But for the clock block, I adopted the dual clock from Dendy Junior, PAL and NTSC. The above scheme is possible to convert it into a clone of NES (Nintendo Entertainment System). Just use 72 Cartridge Slot, replace CPU with UA6527 and replace PPU with UA6528. Clock settings in NTSC and a small change in the path.
This is a schematic of Nintendo Famicom clones. Initially this was the Dendy Junior and Megawalkman JNR-01 schematic. The initial design I got here: https://github.com/mleonid2000/dendy_junior_remastered
For the Video block I use a transistor, Megawalkman version. But for the Clock block, I adopted the double clock of Dendy Junior, PAL and NTSC. The above scheme is possible to change it for NES / Nintendo Entertainment System Clone. Just use 72 cartridge slots, replace the CPU with UA6527 and replace the PPU with UA6528. Clock settings in NTSC and small changes along the way.
Opentendo famicom pcb
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(2)
- Engineer Nov 07,2024
- Francisco Meza Oct 19,2024
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by kevin Harte
- nes lava RGB NES lava RGB board for production
- Game gear blank motherboard Game gear boardGame gear blank motherboard
- Opentendo famicom pcb Description This is a schematic of the Nintendo Famicom KW/Clone. This was originally the schematic ...
- Opentendo NES Nintendo front loader pcb replacement This is the PCB ready for printing from the Opentendo project:https://github.com/Redherring32/OpenTe...
-
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
153 1 1 -
-