Jean-Pierre freedom2000
FRANCE • + Follow
Components
|
|
raspberry zero RP2040 |
x 1 | |
|
|
GY-63 MS5611 pressure sensor |
x 1 |
Description
OpenxSensor variometer and telemetry for RC planes
Ever wanted a very cheap variometer on your RC glider ?
battery voltage monitoring ?
extra RC channels on your receiver ?
Follow this project on hackaday : https://hackaday.io/project/192752-variometer-gps-tracker-remoteid-for-rc-glider
Have a look at this video :
This project uses a raspberry zero (RP2040) with OpenXsensor firmware. It's extremely versatile and powerful.
OpenXsensor on github : https://github.com/mstrens/oXs_on_RP2040
Aug 31,2023
1,160 views
OpenxSensor variometer and telemetry for RC planes
Ever wanted a very cheap variometer on your RC glider ?
battery voltage monitoring ?
extra RC channels on your receiver ?
1160
1
0
Published: Aug 31,2023
Download Gerber file 19
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Jean-Pierre freedom2000
-
FluidNC foam cutter controller
A few months ago I retrofited an old foam cutter based on a MM2001 hardware.This system works quite ...
-
RC plane Sound Machine
Add an engine and gun Sound System to your RC electric flyer.Throttle stick will startup the engine,...
-
Vacuum Pump V2 (DC motor pump)
Electronic board to automate the vacuum pumpThis board has the following characteristics:An ESP32 mi...
-
Vacuum Pump to laminate RC wings with carbon or epoxy
Fibreglass Composites provide unique and valuable benefits, from high strength-to-weight ratios, rel...
-
µstep_solo Stepper motor control board 3A
This is a simple board to control any stepper motor up to 55V 3AIt's based on LMD18245 half bridge d...
-
Convert a Mach3 CNC controller to GRBL or FluidNC
14 years ago I built my own CNC machine. At that time, CNC were running with Xp PC using parallel po...
-
FluidNC laser controller board
I have an old laser engraver. It was built in 1998 and worked quite well until this summer 2023. So ...
-
Convert a DC motor into a stepper one
This project is a way to convert a DC motor into a stepper motor.Of course "conversion" will not be ...
-
OpenxSensor variometer and telemetry for RC planes
Ever wanted a very cheap variometer on your RC glider ?battery voltage monitoring ?extra RC channels...
-
Rezodo: Long Range weather station (lora)
The Rezodo project started in february this year as a pilot project in the 100singes Third Place.To ...
-
Rezodo: Long Range irrigation and weather station (ESPNow module with 6 valves)
Rezodo: Long Range irrigation and weather stationRezodo aims at building a distributed irrigation sy...
-
Rezodo: Long Range irrigation and weather station
The Rezodo project started in february this year as a pilot project in the 100singes Third Place.To ...
-
Kokot: a low energy chicken coop door
All details can be found here : https://hackaday.io/project/189482-kokot-a-low-energy-chicken-coop-d...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
121 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
183 1 1
