Jean-Pierre freedom2000
FRANCE • + Follow
Description
Vacuum Pump V2 (DC motor pump)
Electronic board to automate the vacuum pump
This board has the following characteristics:
- An ESP32 microcontroller will handle all the logic and communication with smartphone over Bluetooth Low Energy and WIFI over UDP
- two 5V relay boards can handle a 230V AC fridge motor coils (compatibilty with fridge compressor)
- an OLED display could be used for debugging
- a pressure sensor will convert vacuum level into a voltage read by the ADC of the MCU
- a DC motor can be controlled via N channels Mosfets
- a brushless DC motor can be controlled with an ESC controller (optionnal 5V control stage)
- The board is powered (optionnaly) with a cheap 12V to 5V DC/DC converter
So this board should be more versatile than the previous one!
A devoted Hackaday's project has been created. Please follow this project for more details : DC motor Vacuum pump @Hackaday
It demonstrates how to control this 12V DC motor pump :
Here is the video of the PCB soldered
And finally here is the system fully working:
Schematic and Layout
DC motor vacuum pump @Hackaday
https://hackaday.io/project/197256-dc-motor-vacuum-pump
Aug 05,2024
168 views
Vacuum Pump V2 (DC motor pump)
2 Layers PCB 50 x 68 mm FR-4, 1.6 mm, 1, HASL with lead, Black Solder Mask, White silkscreen
168
1
0
Published: Aug 05,2024
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/08/18 (GMT+8)
File update record
2024-08-1817:52:56
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(1)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Jean-Pierre freedom2000
-
RC plane Sound Machine
Add an engine and gun Sound System to your RC electric flyer.Throttle stick will startup the engine,...
-
Vacuum Pump V2 (DC motor pump)
Electronic board to automate the vacuum pumpThis board has the following characteristics:An ESP32 mi...
-
Vacuum Pump to laminate RC wings with carbon or epoxy
Fibreglass Composites provide unique and valuable benefits, from high strength-to-weight ratios, rel...
-
µstep_solo Stepper motor control board 3A
This is a simple board to control any stepper motor up to 55V 3AIt's based on LMD18245 half bridge d...
-
Convert a Mach3 CNC controller to GRBL or FluidNC
14 years ago I built my own CNC machine. At that time, CNC were running with Xp PC using parallel po...
-
FluidNC laser controller board
I have an old laser engraver. It was built in 1998 and worked quite well until this summer 2023. So ...
-
Convert a DC motor into a stepper one
This project is a way to convert a DC motor into a stepper motor.Of course "conversion" will not be ...
-
OpenxSensor variometer and telemetry for RC planes
Ever wanted a very cheap variometer on your RC glider ?battery voltage monitoring ?extra RC channels...
-
Rezodo: Long Range weather station (lora)
The Rezodo project started in february this year as a pilot project in the 100singes Third Place.To ...
-
Rezodo: Long Range irrigation and weather station (ESPNow module with 6 valves)
Rezodo: Long Range irrigation and weather stationRezodo aims at building a distributed irrigation sy...
-
Rezodo: Long Range irrigation and weather station
The Rezodo project started in february this year as a pilot project in the 100singes Third Place.To ...
-
Kokot: a low energy chicken coop door
All details can be found here : https://hackaday.io/project/189482-kokot-a-low-energy-chicken-coop-d...
You may also like
-
-
Rotiform Aerodisc to fifteen52 Apex adapter ring
31 0 0 -
-
Micro Planck - 3D Printable Low Profile Mechanical Keyboard
248 1 0 -
Corazon LED intermitente
85 0 0 -
