PIN2DMD DE/SEGA/STERN power adapter
Custom PCB for a power adapter which can be plugged in the powerdriver board of DE version 3 / Sega version 3 & Whitestar / Stern Whitestar & S.A.M machines. It will pass the power from the powerdriver board to a 4p molex connector. You can make your own cable harness or use the WPC/WPC95 wire harness from color dmd. The pin layout is the same as the EVO PCB's and the DC - DC converter PCB.
BOM is above "add to cart" button. Can also be used for assembly by PCBway.
!!! Do NOT use the 5V for powering the LED displays directly, the 5V can only be used for low powered products like microcontrollers !!!
PIN2DMD DE/SEGA/STERN power adapter
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(3)
Log in to post comments.
Reply
More by René Venema
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
223 1 3 -
Easy to print simple stacking organizer with drawers
97 0 0 -
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1177 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
661 0 1 -
