Top
PiRadioConnBoard
Board for easy connection of i2c LCD and 2 incremental encoders to raspberry pi (40-pin).
On the board you can also find an integration of the Pi Supply Switch (R), wich acts like an ATX-style power supply. For the operation of the Pi Supply Switch (R), there are three on-board tactile switches. if you want to move it to an enclosure, you can connect external switches to jst-ph connectors.
This board is mainly intended to use with the internet radio software by Bob Rathbone:
https://bobrathbone.com/raspberrypi/pi_internet_radio.html
But can be used purely for the automatic supply switch. This switch on its own does not work, you will need software running on the RPI. Examples can be found here:
https://github.com/PiSupply/Pi-Supply-Switch
PiRadioConnBoard
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
Log in to post comments.
More by nick segers
-
Commodore 64 1541-II Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
144 1 2 -
Easy to print simple stacking organizer with drawers
82 0 0 -
-
-
Modifying a Hotplate to a Reflow Solder Station
1125 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
630 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1418 4 3
