Nathan Kuchel
AUSTRALIA • + Follow
Components
|
|
EFR32MG1P232F256GM48 or EFR32MG12P332F1024GM48 |
x 1 |
Description
Pool Temperature Sensor Zigbee/Bluetooth
This design is an addition to my home automation to help make daily automated decisions on how long to run the chlorinator. eg.run longer when the temperature is high and chlorine is burning off quicker.
Partnering this with my metering readings I should be able to reduce the energy cost of running my pool.
Nov 05,2019
1,987 views
end-flag
Pool Temperature Sensor Zigbee/Bluetooth
2 Layers PCB 51.4 x 57.4 mm FR-4, 1 mm, 1, HASL with lead, Yellow Solder Mask, White silkscreen
Silabs EFR32MG one-wire (DS18S20) temperature sensor to fit
1987
0
1
Published: Nov 05,2019
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
Log in to post comments.
Upload photo
0 / 10000
- Reply
More by Nathan Kuchel
You may also like
-
How to measure weight with Load Cell and HX711
293 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
431 0 0 -
RGB LED Matrix input module for the Framework Laptop 16
708 0 2 -
-
