|
|
Header-Female-2.54_1x2 |
x 1 | |
|
|
1N4148 |
x 1 | |
|
|
Button |
x 1 | |
|
|
Resistor 10K |
x 2 | |
|
|
Resistor 100K |
x 1 | |
|
|
Resistor 1K |
x 2 | |
|
|
NE555 |
x 1 | |
|
|
2N3904 |
x 1 | |
|
|
Capacitor 1uf |
x 1 |
Power On/Off Button
Look ...
I decided to make DIY Laboratory Power Supply .
I found all component that i need , i bought a DIY plastic box as case for it , i selected a Voltmeter, DC-DC Adjustable Buck and Boost modules and put it all in the case .
I like all i did , but not the power button . It was a small latching Metal Push Button . Then i decided that i need a button like we see in PCs or in other gadgets . I want to make a button without latching like you press to power on and press again to power off .
Here is the circuit for my Power Button realization .
You can also find all modules pictures chosen by me attached .
Power On/Off Button
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(2)
- Likes(2)
More by Hrach
-
Encoder EC11 with hardware anti-bounce system
Standard EC11 encoder powered with SN74HC14DR Schmidt trigger !Forgot about using all interruption...
-
TM1637 Display
I use this type of displays in my diy projects as a big , readable display with very small library ....
-
LNK306 Power Supply
Its a very small and simple power supply for LED and Micro controllers . Bom is attached . I use it ...
-
DIY Solid State Relay
BTA16-600 based AC Arduino Controlled Solid State Relay for your DIY electronic . I used this relay ...
-
Electronic Load 150W
A Small , but Powerful DIY Electronic Load 150 W wich can be used to test and load your DC DC conver...
-
DC PWM Controller TL494
Its the most powerful PWM controller based on TL494 .
-
5000w AC Dimmer
This is a AC Dimmer for controlling the speed of powerful AC motors , Funs ant everything that work ...
-
Arduino Controlled DC-DC Buck Converter
This Small PCB can be used everywhere.U can control your T12 iron , u can control your Power supply ...
-
Arduino Controlled DC-DC Buck Converter
This Small PCB can be used everywhere.U can control your T12 iron , u can control your Power supply ...
-
DC Relay Switch Module
I need it for my DIY Laboratory Power Supply to switch DC voltage channels between 24v and 50v .
-
BLDC control board
I know at 100% all we have at least 1 broken HDD or Video or Floppy . What we can do with them ????...
-
Soft Start for any AC motor
All of us know , that we always have problems with power motors when we connect its to AC . This cir...
-
Power On/Off Button
Look ... I decided to make DIY Laboratory Power Supply .I found all component that i need , i bought...
-
BLDC Control Board For Arduino v2 SMD
Second , minimised version of BLDC motor control board https://www.pcbway.com/project/shareproject/B...
-
Arduino PID controller
====== I made from my AC Dimmer shield a PID controller with MAX6674 Cold-Junction-Compensated K-The...
-
AC Dimmer shield
AC Dimmer Shield for Arduino Nano I made from my AC Dimmer Arduino (https://www.pcbway.com/project/s...
-
BLDC Shield
BOM + Arduino Nano With this Shield with potentiometer You can control any BLDC motor . U need just ...
-
BLDC Control Board For Arduino
BOM & SCHEMATIC Its a small board that allows you control any BLDC 3/4 Phase motor . You can con...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
