RC6502 Apple 1 Replica (Module prototyping board)
Did you ever want to try your hand at soldering together a computer? Now you can relive the experience Wozniak had tinkering while building the first Apple computer in his garage, all from the comfort of your favourite workspace... Most of the design-work already done, so just heat up your soldering iron and get to work on it!
This module has a lot of space for developing and testing out your own designs, because what's more fun than designing your own stuff? Seeing them in action, that's what! Has a backplane connector at the bottom with all of the pins labelled for easy reference, the common busses at the other three sides also makes it a lot easier to work with VCC and ground (the third bus line can be used for whatever you like, or just bridge it to one of the other two).
RC6502 Apple 1 Replica (Module prototyping board)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
- Hein Pragt Jun 29,2023
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Tor-Eirik Bakke Lunde
- LED Tuning Board If you were to take a look at my shared projects, you'll find that for someone who doesn't actually ...
- BulkyMIDI-32 Extras BulkyMIDI-32 is based on the mt32-pi project, bringing you the all the auditory excellence that was ...
- ZX Interface 2.021 I've grown fond of cartridge formats in my later years, mostly because of the feeling you get by bro...
- MSX Mega Drive Adapter I've been playing around with my MSX computer recently, and as the computer itself supports a two bu...
- C64 Joystick Adapter (Faceplate) A rather stylish looking faceplate to go with the C64 Joystick Adapter, it covers up most of the ele...
- C64 Joystick Adapter I recently bought a Raspberry Pi for use with emulators on modern systems, and so I wanted an easy w...
- CPC464 Joystick Splitter (Faceplate A1) I made a simple joystick splitter for the Amstrad CPC 464 on a simple PCB, so I thought - why not ma...
- CPC464 Joystick Splitter Simple passive device that breaks out the joystick port on the Amstrad CPC 464 computer so that two ...
- Apple 2 Prototyping Card (fullsize) I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
- Apple 2 Prototyping Card (small) I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
- C64 Pi1541-II Faceplate (variant B) The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 JoyKEY (Sega Master System adapter) With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
- C64 JoyKEY (Atari 7800 adapter) With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
- C64 Pi1541-II Backplate The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 Pi1541-II Faceplate (variant A) The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 Pi1541-II Module The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- Arcade 2040 Over the past few years I've been playing around with building new controllers for both modern and v...
- BulkyModem (Commodore 64/128 UserPort Adapter) This is an adapter for hooking up your BulkyModem or BulkyModem-32 to your Commodore 64/128. It take...
-
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-