Brian K. White
UNITED STATES OF AMERICA • + Follow
Components
|
|
90 degree male pin |
x 2 | |
|
|
cap 1uf 0805 |
x 3 | |
|
|
resistor 47k 0805 |
x 1 | |
|
|
XCR3064XL-10VQG44I |
x 1 | |
|
|
M29F800FB5AN6E2 |
x 1 | |
|
|
LP2980AIM5X-3.3 |
x 1 |
Description
REX Classic, BKW re-make
Ordering settings:
- Min tracks/spaces: 6/6mil
- Copper finish: ENIG
- Advanced: Castellated half-holes
Carrier: SLS or MJF nylon.
Code
https://github.com/bkw777/REX
Schematic and Layout
http://tandy.wki/REX
CAD-Custom parts and enclosures
Molex78802_PCB_28.stl
Dec 01,2020
1,113 views
end-flag
REX Classic, BKW re-make
REX is an on-board option-rom library for TRS-80/TANDY Model 100, 102, 200.
1113
4
0
Published: Dec 01,2020
Download Gerber file 10
PCBWay Donate 10% cost To Author
File Last Updated: 2025/02/01 (GMT+8)
File update record
2025-02-0121:17:58
Gerber file is updated.
2024-04-2005:40:01
CAD or technical drawing file is updated.
2023-11-0808:08:25
Gerber file is updated.
2023-07-0507:06:12
Gerber file is updated.
2023-07-0506:18:52
Gerber file is updated.
2023-07-0505:51:57
Gerber file is updated.
2023-07-0504:38:27
Gerber file is updated.
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
Log in to post comments.
Upload photo
0 / 10000
More by Brian K. White
-
Teensy MounT
https://github.com/bkw777/MounT
-
TANDY 600 192K DUAL RAM
192K SRAM for TANDY 600The original option RAM banks for TANDY 600 are 96K, and the machine can acce...
-
TANDY 200 RAM 48K TSOP
48K Dual-bank option ram module for TANDY 200How to do the legs: https://gist.github.com/bkw777/52d8...
-
reQUAD - RAM Expansion for TRS-80 Model 100
Replaces the internal 32k SRAM in a TRS-80 Model 100 with a software-switchable 4 banks of 32k SRAM ...
-
ScopeShuntX
Shunt resistor for measuring current with an oscilloscope.Inspired by github.com/voltlog/ScopeShuntS...
-
de0-nano fpga rgb2vga
https://github.com/bkw777/rgb2vgahttps://sites.google.com/site/tandycocoloco/rgb2vgaConvert 15khz RG...
-
MiniNDP - RAMDisk for TRS-80 Model 100/102/200
Re-implementation of Node Systems DATAPAC / RAMPAC.1 Megabyte ram disk for TANDY Model 102 & 200...
-
512k MRAM IC-Card for TANDY WP-2
REQUIRES 1.2 mm PCBWarning: The total cost for parts for this is around $100 USDThis is an "IC-Card"...
-
LPT Capture
Capture the output from a parallel printer port.
-
TANDY Portable Disk Drive Cable
This is the special level-shifting RS-232 cable needed for the Tandy Portable Disk Drive aka Brother...
-
Molex 7880x-28 PCB Carrier
Order usingMaterial: NylonProcess: SLS (or MJF if PCBWAY starts offering it)This is the plastic ca...
-
FluxEngine Hat
Adapter PCB and snap cover for FluxEngineProvides both a 34-pin connector for normal 3.5 inch and 5....
-
Batteries for REXCPM
Provides an on-board memory battery for the REXCPMAssembly notes:For battery holders BT1, BT2, BT3 (...
-
M4ROM_TANDY - Writable multi option rom module for TRS-80 Model 100/102/200
ONLY for TRS-80 / TANDY Models 100, 102, 200Provides 4 virtual 32K EPROM from a single 128K flash ch...
-
M4ROM Programming Adapter for M4ROM_TANDY and M4ROM_27256
Programming adapter to program M4ROM_TANDY and M4ROM_27256 .Solid electrical contact with the center...
-
M4ROM 27256 - Writable multi option rom module for EPSON PX-4, PX-8, TANDY 600, any Molex 78805 socket with standard pinout
Provides 4 virtual 32k EPROM from a single 128k flash chip, in a Molex 78802 form factor to fit in a...
-
TANDY 600 RAM - TINY Version
Tiny version of 96K ram module for TANDY 600The larger card below is the original 96K ram card for c...
-
TANDY 600 RAM 96K THT
96K SRAM module for TANDY 600, all through-hole components version. Replaces Tandy Cat. No. 26-3910...
-
Teensy MounT
https://github.com/bkw777/MounT
-
TANDY 600 192K DUAL RAM
192K SRAM for TANDY 600The original option RAM banks for TANDY 600 are 96K, and the machine can acce...
-
TANDY 200 RAM 48K TSOP
48K Dual-bank option ram module for TANDY 200How to do the legs: https://gist.github.com/bkw777/52d8...
-
reQUAD - RAM Expansion for TRS-80 Model 100
Replaces the internal 32k SRAM in a TRS-80 Model 100 with a software-switchable 4 banks of 32k SRAM ...
-
ScopeShuntX
Shunt resistor for measuring current with an oscilloscope.Inspired by github.com/voltlog/ScopeShuntS...
-
de0-nano fpga rgb2vga
https://github.com/bkw777/rgb2vgahttps://sites.google.com/site/tandycocoloco/rgb2vgaConvert 15khz RG...
-
MiniNDP - RAMDisk for TRS-80 Model 100/102/200
Re-implementation of Node Systems DATAPAC / RAMPAC.1 Megabyte ram disk for TANDY Model 102 & 200...
-
512k MRAM IC-Card for TANDY WP-2
REQUIRES 1.2 mm PCBWarning: The total cost for parts for this is around $100 USDThis is an "IC-Card"...
-
LPT Capture
Capture the output from a parallel printer port.
-
TANDY Portable Disk Drive Cable
This is the special level-shifting RS-232 cable needed for the Tandy Portable Disk Drive aka Brother...
-
Molex 7880x-28 PCB Carrier
Order usingMaterial: NylonProcess: SLS (or MJF if PCBWAY starts offering it)This is the plastic ca...
-
FluxEngine Hat
Adapter PCB and snap cover for FluxEngineProvides both a 34-pin connector for normal 3.5 inch and 5....
You may also like
-
-
Modifying a Hotplate to a Reflow Solder Station
521 0 4 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
304 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
761 4 2 -
How to measure weight with Load Cell and HX711
551 0 3 -
