|
DiptraceDiptrace
|
RPi Pico Pack
The RPi Pico Pack is a development board for a Raspberry Pi Pico, Pico H, or Pico W. It has 40 header pins to accept the Pico, and 40 more header pins to connect any of the Pico pins to a proto board or a solderless breadboard. The identification of each Pico pin is abbreviated and printed adjacent to the pin.
In addition, the RPi Pico Pack contains a Mini360 buck converter to allow the Pico to be powered from 6 to 15 volts DC. A yellow LED indicates that 5 VDC is available and a green LED indicates that 3.3VDC is available. A momentary push button is provided to reset the Pico with a simple press.
With the Pico installed, the RPi Pico Pack provides all conveniences of an Arduino UNO, but uses a much more powerful microcontroller — the RP2040. And it's all contained on a printed circuit board only 1.5 inches (3.81cm) wide and 3.5 inches (8.89cm) long...a bit smaller than an UNO.
Now, when you get a microcontroller project idea you want to quickly build and test, don't drag out that old, tired UNO. Grab the future with a Raspberry Pi Pico in the RPi Pico Pack.
Watch the YouTube video. https://youtu.be/n8JL-OgXcZE
RPi Pico Pack
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
- John John Vu Aug 26,2022
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
9design
-
10usability
-
10creativity
-
8content
More by Charles Hampton
- MPPT Solar Controller and Power Supply Motherboard This is an MPPT Solar Controller and Power Supply and is part of a project to create a wireless home...
- RPi Pico Pack The RPi Pico Pack is a development board for a Raspberry Pi Pico, Pico H, or Pico W. It has 40 heade...
- Morse Code Keyer, Rev: 7 This is a keyer that I designed to be used with a "sideswiper" or "cootie" Morse Code sending key. T...
-
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-