Michael Fong
AUSTRALIA • + Follow
Description
TMS2532 (AT28HC64B)
This is a replacement for the TMS2532 using an AT28HC64B EEPROM.
There is an adapter board also "TMS2532 (AT28HC64B) Adapter" so you can burn it as an AT28HC64B EEPROM as it can not be burnt as a TMS2532.
This has been tested as a 4K Character ROM replacement on a C64 ( see image ), but still use it at your own risk.
http://8bitshardway.blogspot.com/2020/04/building-modern-tms2532-drop-in.html
May 28,2020
1,740 views
TMS2532 (AT28HC64B)
2 Layers PCB 20.32 x 34.29 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
This is a replacement for the TMS2532 using an AT28HC64B EEPROM.
1740
3
0
Published: May 28,2020
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)
License.
- Comments(0)
- Likes(3)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Michael Fong
-
MiSTer C64 IEC and C128 Keyboard Adapter
This is an expensive and very niche way to get a board to add to your MiSTer stack that implementsth...
-
ATF1504AS(L) CPLD Development Board
A simple development board for the ATF1504AS(L) CPLDhttp://8bitshardway.blogspot.com/2020/05/atmel-a...
-
TMS2532 (AT28HC64B) Adapter
This is the adapter board "TMS2532 (AT28HC64B) Adapter" ONLY.You need it to program the following EE...
-
TMS2532 (AT28HC64B)
This is a replacement for the TMS2532 using an AT28HC64B EEPROM.There is an adapter board also "TMS2...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
121 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
183 1 1
