Tektronix TM500 Mainframe Tester 067-1201-99
Note from PCBWay: This project includes 4 kinds PCB. Due to the system, the default order is the main PCB. If you need the other three boards, please check the two links below:
Front Panel PCB: https://www.pcbway.com/project/shareproject/Tektronix_TM500_Mainframe_Tester_067_1201_99_Front_Panel_PCB_559b6c45.html
Range Switch PCB: https://www.pcbway.com/project/shareproject/Tektronix_TM500_Mainframe_Tester_067_1201_99_Range_Switch_PCB_e20de317.html
This project is for the construction of a single-width TM 500 plug-in utilizing the blank plug-in kit.P/N 040-0652-02.
Link to construction video:
https://youtu.be/Afwqtc6Fxd4
The plug-in's primary purpose is to test TM 500 series power modules (mainframes) It is also useful as a limited performance power supply for breadboard or student use.
In its primary function as a test unit, it checks only the integrity of mainframe power supply components. It does not check "interface" connections; these checks (when applicable) may be made with a simple ohmmeter or continuity tester.
For full documentation, please see the google drive link for the instruction manual and all other files.
https://drive.google.com/drive/folders/1yj52Z_BtGZ7Q9BB2jS9Lf2Uz39turS4-?usp=sharing
Tektronix TM500 Mainframe Tester 067-1201-99
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(4)
- 2 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
More by Jared NearFarMedia
-
BNC Connector Lever
This is a lever to add to male BNC connectors to make connecting things like test fixtures to your i...
-
HP 53131A, 53132A, 53131A 3GHz Input Option 030
This is a reproduction of the 3GHz input option (Option 030) to suit the HP 53131A, 53132A and 53181...
-
Tektronix TM500 Mainframe Tester 067-1201-99——Range Switch PCB
Range Switch PCB for Project Tektronix TM500 Mainframe Tester 067-1201-99Note from PCBWay: This proj...
-
Tektronix TM500 Mainframe Tester 067-1201-99——Front Panel PCB
Front Panel PCB for Project Tektronix TM500 Mainframe Tester 067-1201-99Note from PCBWay: This proje...
-
Tektronix TM500 Mainframe Tester 067-1201-99——Face Plate
Face Plate for Project Tektronix TM500 Mainframe Tester 067-1201-99Note from PCBWay: This project in...
-
Tektronix THS710, THS720, THS730 series oscilloscope button flat flex
This flat flex PCB is a direct replacement for the front panel on the Tektronix THS700 series portab...
-
Tektronix TDS500 Oscilloscope A21 VCO Board
This is a replacement for the A21 Voltage Controlled Oscillator board mounted to the acquisition boa...
-
Tektronix TM503 Replacement PCB - FRONT PANEL
This is a replacement PCB for the Tektronix TM503 mainframe.THIS IS JUST THE FRONT PLATE!Don't forge...
-
Tektronix TM503 Replacement PCB
This is a replacement PCB for the Tektronix TM503 mainframe.Parts substitutions are allowed, there i...
-
Tektronix SG503 Front Plate
This is a direct replacement for the plastic front plate in the late model Tektronix SG503 Levelled ...
-
Dallas DS1225Y FRAM Adapter
This PCB will let you convert a Dallas DS1225Y non-volatile SRAM chip to an FRAM chip that does not ...
-
Tektronix DM502 Front Plate
This is a direct replacement for the plastic front plate in the Tektronix SG504.It bolts directly in...
-
Tektronix PG506 Front Plate
This is a direct replacement for the plastic front plate in the early type Tektronix PG506.It bolts ...
-
Tektronix SG504 Front Plate
This is a direct replacement for the plastic front plate in the Tektronix SG504.It bolts directly in...
-
Tektronix TDS500 TDS600 TDS700 Oscilloscope PSU Tester
(Image shown is an older revision)This board is designed to plug directly into the PSU board as used...
-
Tektronix AFG5101 Small Extender Cable - 32-Pin
This is the small adapter cable to allow for calibration and servicing for the Tektronix AFG5101 Arb...
-
Tektronix AFG5101 Large Extender Cable - 64-Pin
This is the large adapter cable to allow for calibration and servicing for the Tektronix AFG5101 Arb...
-
Tektronix AFG5101 Function Generator Option 02 Upgrade
This is a recreation of the Option 02 A5 Synt Board upgrade to suit the Tektronix AFG5101 Arbitrary ...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
112 0 0 -
DIY Laser Power Meter with Arduino
162 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
156 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
558 0 2
