USB Power/UART breadboard breakout
This simple gadget allows you to connect standard BB-830 breadboard to your computer directly, delivering USB power (+5V) directly, and the onboard USB to UART converted makes it very simple to connect to any serial-enabled device (like AVR chips, breadboard 8-bit CPUs and other projects).
There are three LEDs on the board - one indicating power being active and two more signalling TX/RX operation on the UART channel.
Two more pins of the FTDI chip are exposed (CBUS0 and CBUS3), and these can be configured using software provided by FTDI.
Please note: UART converter is optional and in this case you can skip the 47pF caps, 27Ohm resistors, 100nF/10nF caps and two LEDs/470Ohm resistors. Ferrite bead is required for power delivery and 4,7uF cap is required for stability.
USB Power/UART breadboard breakout
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Dawid Buchwald
-
USB Power/UART breadboard breakout
This simple gadget allows you to connect standard BB-830 breadboard to your computer directly, deliv...
-
Breadboard friendly VGA breakout board
Building simple VGA card can be a great adventure, but as always, the last mile of the journey is us...
-
65C02 Hobby Computer
This is my personal version of the 6502 Computer designed by Ben Eater. I have added serial over USB...
-
Modified version of Clock Module by Ben Eater's
This is modified version of Ben Eater's clock module used in his Breadboard Computer and 6502 Comput...
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
63 0 0 -
-
-
-
Sega Master System RGB Encoder Switcher Z80 QSB v1.2
65 0 0 -
18650 2S2P Battery Charger, Protection and 5V Output Board
87 0 0 -
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
455 0 7 -
Sony PlayStation Multi Output Frequency Oscillator (MOFO) v1
134 0 2 -
