Components
|
|
FTD240XS |
x 1 |
Description
USB controled 1 of 16 relays
This is and update to a 1 of 16 MUX. I switched to relays so I can connect it to DVM and measure Ohms, not just voltage.
Using Omron G6DN-1A DC5 (NOT L)
All in a Hammond 1455N1201 box that will need a little trim.
This is a board I designed to operate off the USB 5 Volts. The relays are low current 22mA 3.5 picking voltage.
To control the relays you will need the FTDI API form FTDI.
Jun 10,2020
1,606 views
end-flag
USB controled 1 of 16 relays
2 Layers PCB 100 x 100 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
FTDI FT240XS to a 1 of 16, with 10x O'scope CKT BNC out.
1606
1
2
Published: Jun 10,2020
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(1)
More by i_bell
-
USB OP-AMP Buffer Driver
USB FTDI 240XS 8 BIT I/O, connected to 4 dual op amps as level shifters. TLV2372 Dual OP-amp 3-MHz ...
-
USB controled 1 of 16 relays
This is and update to a 1 of 16 MUX. I switched to relays so I can connect it to DVM and measure Ohm...
-
1 of 4 RF switch USB Controlled
I am hoping this works out, it is my first attempt with PCB way with a non-FR4 board material. Stirp...
-
1 of 16 USB controled Mux for O'Sope or Meter
### DESCRIPTION1 of 16 MUX for oscilloscope, with a 10X probe on the PCB. The Layout can support a T...
-
2 Line, Quad, 1 inch, 7 segment Displays
### DESCRIPTION2 Line, shift out, 4 digit, 1 inch 7 segment displays.### TECHNICAL DETAILS / COMPONE...
You may also like
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
239 1 3 -
Easy to print simple stacking organizer with drawers
101 0 0 -
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1180 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
666 0 1 -
The schematics are in the images. I did this as a project at work. The company owns the work product. I was allowed to share the PCB. But not the files. Good luck.