Dimitris Oikonomou
GREECE • + Follow
Description
alternaticerobotester
this is a bidirectional switch based on 1:4 analog muxs powered up from 5volts.it can pass any signal from 0-5.5 volts into 4 different connectors.
Apr 30,2023
328 views
alternaticerobotester
2 Layers PCB 99.7 x 96.9 mm FR-4, 1.6 mm, 1, HASL with lead, Red Solder Mask, White silkscreen
15signal switch 1:4 bidirectional
328
0
0
Published: Apr 30,2023
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Dimitris Oikonomou
-
timer project
Used a timer circuit to adjust open and closing time of the lens and an adjustable power supply circ...
-
alternaticerobotester
this is a bidirectional switch based on 1:4 analog muxs powered up from 5volts.it can pass any signa...
-
bandpass chebysev filter project
this is a bandpass chebysev filter passing 88MHz-108MHZ frequencies. you can use an online filter ca...
You may also like
-
-
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
54 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
271 4 1 -
How to measure weight with Load Cell and HX711
376 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
510 0 0
