Picaxe 20X2 prop controller.kicad_pcb Version 3
A controller board based on the Picaxe 20X2 chip with integrated MP3 connector, I2C connector, High Current ULN2803A chip, Piezo, All 8 inputs can be pulled high or Low via jumper if desired, Onboard or off-board Power possible, 6 servo connectors, Power and ground buses. Can be used for Robotics, animatronics, or just a general prop or escape room controller. Version 3 - fixed a missing trace, Made the Programming header notch deeper to fit the connector properly, and moved the 2nd MP3 connector slightly to accomidate a new version of the MP3 serial player (V3.2).
Picaxe 20X2 prop controller.kicad_pcb Version 3
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Engineer
-
Picaxe 20X2 prop controller Revision 4
This is the latest revision of this project (version 4). It is a robotic or prop controller based on...
-
Picaxe 20X2 prop controller.kicad_pcb Version 3
A controller board based on the Picaxe 20X2 chip with integrated MP3 connector, I2C connector, High ...
-
Adapter Board to be used with my Picaxe 20X2 prop controller board
Adapter Board to be used with my Picaxe 20X2 prop controller board to be able to mount the MP3 playe...
-
Picaxe 20X2 Prop / Robot controller
This is a Prop / Robot controller based on the Picaxe 20X2 controller. The controller can operate up...
-
-
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
57 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
273 4 1 -
How to measure weight with Load Cell and HX711
376 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
510 0 0
