Martin Refseth
NORWAY • + Follow
Tools, APP Software Used etc.
|
KiCADKicad
|
Description
Please check link for updated project
The last project was accidentally shared as a single layer board, please use this link instead https://www.pcbway.com/project/shareproject/CR1616_Battery_Retainer_for_Game_Boy_Advance_Games_Prototype_bc1f9716.html
Dec 07,2023
704 views
Please check link for updated project
1 Layers PCB 7.3 x 28.8 mm Polyimide Flex, 0.1 mm, 1, Immersion gold (ENIG), Yellow Solder Mask, White silkscreen
https://www.pcbway.com/project/shareproject/CR1616_Battery_Retainer_for_Game_Boy_Advance_Games_Prototype_bc1f9716.html
704
0
0
Published: Dec 07,2023
PCBWay Donate 10% cost To Author
File Last Updated: 2023/12/08 (GMT+8)
File update record
2023-12-0817:18:44
Gerber file is updated.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Martin Refseth
-
Machined DS Cartridge
A machined Nintendo DS cartridge for Original GamesThese are machined replacement housings for origi...
-
Game Boy Camera Flashcart | 2x1MB | FRAM |
Please read the license!What is it?This is a reflashable game boy camera, it uses parts of an origin...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Crystal Clear Edition
This project is based on a flashcart that used the MBC3 chip from a real cart, however the issue wit...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Suicune Edition
This project is based on a flashcart that used the MBC3 chip from a real cart, however the issue wit...
-
DualShock4 USB Type C [JDS-001/JDS-011]
PS4 Controllers, but with USB C
-
Machinable|3D Printable Switch Cartridge
Current revision untested, but should work, order at your own risk.A replacement enclosure for Ninte...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Coral Edition | Advanced PCB
This is the advanced pcb version of these intended for ordering non standard colors or finishes.
-
CR1616 Battery Retainer for Game Boy Advance Games | "Prototype"
Please keep in mind that these are prototypes, i can't guarantee that they will be as reliable as CR...
-
Please check link for updated project
The last project was accidentally shared as a single layer board, please use this link instead https...
-
CR2Retainer | Game Boy Cart battery retainer for CR2025/CR2032 cells
Tabbed CR cells are hard to find in a large part of the world, these flex pcb's let you use standard...
-
Les Paul ZMK-Hero
This is a replacement bluetooth enabled mainboard for Les Paul PS3 Guitar Hero controllers with a 13...
-
Machined Game Boy Cartridge
A Machined Game Boy cartridge for Original games or OEM style FlashcartsOrdering:Front:Make sure to...
-
AGB-E02-20 | Game Boy Advance | Replacement PCB | V2
New in Version 2:Updated Traces to be 1 to 1 with an original boardUpdated Copper Fill to be 1 to 1 ...
-
MBC30 Flashcart | 4MB | FRAM | RTC | Coral Edition
Single post Coral edition of the MBC30 flashcart
-
Mini Game Boy Camera Flashcart | 1MB | FRAM |
Please read the license!
-
Game Boy Cartridge Housing | 3D Printed
"OEM" style cartridge housing, fits original single post games & MBC based flashcarts.
-
MBC5 Flashcart Christmas Tree Edition | 4MB Flash | FRAM
A simple MBC5 flashcart shaped like a christmas tree, should fit an original (or Cloud Game Store) c...
-
MBC5 Flashcart | 2x2MB or 4MB | FRAM | V3
A simple flashcart that uses an MBC5 from an original cartridgeChanges in V3:Added rumble support, t...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
153 1 1 -
-
