Nico Gartner
AUSTRIA • + Follow
Tools, APP Software Used etc.
|
KiCADKicad
|
|
|
Inkscape |
Description
simple pcb smd reflow heater
Aluminum PCB Reflow Heater
- Cheap Design: Only m3 screws and nuts, an adjustable dc power supply and wires are required to build this project.
- Open source: Hardware licensed under MIT License and creating using KiCad
Instructions:
- Power Supply Connection: Connect the Aluminum PCB Reflow Heater to a compatible adjustable DC power supply using the smd solder pads for wires.
- Voltage Setting: Set the desired voltage on the dc power supply and measure the temperature using a thermocouple or an infrared thermometer. Ensure that the temperature range is appropriate for the solder paste being used.
- Preheat: Allow the device to preheat until it reaches the required temperature.
- Reflow Process: Once preheated, carefully place the PCB with solder paste onto the heater surface.
- Cool Down: After completing the reflow process, allow the PCB to cool down naturally before handling.
Schematic and Layout
GitHub repository
https://github.com/HeyJoFlyer/simple-pcb-smd-reflow-heater
Jan 25,2024
505 views
simple pcb smd reflow heater
Do you want to reflow your PCBs easily and cheaply? Do it with this project, only a DC power supply is necessary.
505
0
0
Published: Jan 25,2024
Download Gerber file 9
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-MIT
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Nico Gartner
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
116 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
181 1 1
