tttttx2/ESPHome_IR_bme680
This board is intended to be used for ESPHome. It allows you to have multiple climate sensors (Gas resistance, humidity, pressure, temperature) as well as IR TX and RX to control IR controlled devices you have in the room. Personally I use it to turn on and off my projector whenever I want to watch a movie but use it for whatever you want.
After initially flashing it just update it OTA and you never have to care about hooking it up using the pin header again, however it needs to be done the first time. The reason is to keep costs and the impact on the environment low for parts that never really get used anyways.
See details here: https://github.com/tttttx2/ESPHome_IR_bme680
tttttx2/ESPHome_IR_bme680
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
Log in to post comments.
More by tttttx2
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
335 1 3 -
Easy to print simple stacking organizer with drawers
121 0 0 -
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1227 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
702 0 1 -
