|
KiCad 8.0KiCad
|
2364 2332 2316 Universal Re-Programmable Replacement ROM
This board uses the TSOP-32 SST39SF010A 1Mbit flash ROM and can replace a 2364, 2332, or 2316 mask ROM. It uses a separate adapter PCB to allow programming/re-programming as a DIP-32 SST39SF010A. Configuring the board for different chip types and/or active high/low chip select pins is done through solder jumpers on the board.
You can also use the labeled, higher address(A13, A14, A15, A16) lines to do ROM switching.
This board has been confirmed working in the Commodore 64 Kernel, Basic, and Character ROMs. The Commodore VIC-20 Character, Kernel, and Basic ROMs. The TRS-80 Model 4 2316 "ROM C". And to replace the ROM chip in the ATARI 2600 cartridges.
The link to the programming adapter is here:
Here is my YouTube video about the project:
https://youtu.be/TJC8TpoZEe0?si=AiMhfKF8lh6BOHjD
2364 2332 2316 Universal Re-Programmable Replacement ROM
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(2)
- Likes(3)
More by James Harmony
-
2364 2332 2316 ROM Replacement Programming Adapter
This is the programming adapter for my 2364, 2332, 2316 Universal ROM replacement. It uses pogo pins...
-
2364 2332 2316 Universal Re-Programmable Replacement ROM
This board uses the TSOP-32 SST39SF010A 1Mbit flash ROM and can replace a 2364, 2332, or 2316 mask R...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
