4 Line PWM LED Controller
This project includes 4 lines of PWM controlling LEDs via ESP32 (Wi-Fi, BLE). This PCB is for heat-shrink tubing assembly and that is why there is no mounting holes. Maximum safe load for each line is 3A (I recommend not more than 2A), that will be enough for 5 meters of RGB (RGBW) strips with 36 W overall power and also measure voltage from photoresistor. Of course you can control not only LED strips but remember about maximum power rate. I do not upload sourse code because I hope you can find it yourself and improve it. Good luck!
4 Line PWM LED Controller
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(2)
- Likes(1)
- 6 USER VOTES
- YOUR VOTE 0.00 0.00
-
5design
-
6usability
-
5creativity
-
5content
-
6design
-
7usability
-
6creativity
-
6content
-
6design
-
6usability
-
4creativity
-
3content
-
7design
-
5usability
-
6creativity
-
5content
-
8design
-
8usability
-
8creativity
-
5content
-
7design
-
9usability
-
5creativity
-
4content
More by Aleksey Fadeev
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
125 0 0 -
DIY Laser Power Meter with Arduino
182 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
165 0 2
