Components
|
7007Keystone Electronics
|
x 2 | |
|
7006Keystone Electronics
|
x 2 |
Description
4 Wire Short for Banana Leads
A basic board with a 1mm trace between the connectors.
Handy if you need to short at the end of the test leads rather than at the terminals.
I needed a board to null/zero test leads.
May 25,2024
171 views
4 Wire Short for Banana Leads
2 Layers PCB 35.6 x 34.3 mm FR-4, 1.6 mm, 1, HASL with lead, Blue Solder Mask, Yellow silkscreen
A basic board with a 1mm trace between the connectors. Handy if you need to short at the end of the test leads rather than at the terminals.
171
0
0
Published: May 25,2024
Download Gerber file 0
PCBWay Donate 10% cost To Author
File Last Updated: 2024/05/25 (GMT+8)
File update record
2024-05-2521:15:47
Gerber file is updated.
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Engineer
-
Dual Trailer socket for 12N & 12S sockets. Fits to 110 Land Rover Defender
The original part I have is very rusty so I made this up to replace the one I have. Its made to the ...
-
4 wire resistor standard
The board has a 4 wire setup for measuring resistors. You can have 2 resistors in a series or 4 in a...
-
4 Wire Short for Banana Leads
A basic board with a 1mm trace between the connectors.Handy if you need to short at the end of the t...
You may also like
-
-
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
54 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
268 4 1 -
How to measure weight with Load Cell and HX711
376 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
508 0 0
