Description
4 wire resistor standard
The board has a 4 wire setup for measuring resistors. You can have 2 resistors in a series or 4 in a series/parallel setup.
10 kΩ + 10 kΩ = 20 kΩ
10 kΩ + 10 kΩ
= 10 kΩ
10 kΩ + 10 kΩ
10 kΩ + 5 kΩ = 15 kΩ
10 kΩ + 5 kΩ
= 7.5 kΩ
10 kΩ + 5 kΩ
If you populate with just 10 kΩ resistors, you get 10 kΩ, the advantage is you can mix the resistors to get the closest to 10 kΩ.
I have also added an option for a thermister or a 1-wire option for measuring the resistors' ambient temperature.
May 27,2024
177 views
end-flag
4 wire resistor standard
2 Layers PCB 62.8 x 45.8 mm FR-4, 1.6 mm, 1, None, Blue Solder Mask, Yellow silkscreen
Simple board for making a basic resistance standard
177
0
0
Published: May 27,2024
Download Gerber file 0
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(0)
- Likes(0)
Log in to post comments.
Upload photo
0 / 10000
More by Engineer
-
Dual Trailer socket for 12N & 12S sockets. Fits to 110 Land Rover Defender
The original part I have is very rusty so I made this up to replace the one I have. Its made to the ...
-
4 wire resistor standard
The board has a 4 wire setup for measuring resistors. You can have 2 resistors in a series or 4 in a...
-
4 Wire Short for Banana Leads
A basic board with a 1mm trace between the connectors.Handy if you need to short at the end of the t...
You may also like
-
-
-
Modifying a Hotplate to a Reflow Solder Station
638 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
351 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
845 4 2 -
How to measure weight with Load Cell and HX711
589 0 3
