68040-to-68060 adapter
The one thing that is more rare than 68060 CPUs is Amiga accelerator boards for the 68060 CPUs (especially those with RAM). But there's help in sight: If you are a patient person and don't have two left (or right) hands when touching a soldering iron, you can make your own adapter.
I made one of these a few months back that worked out of the box. Since then I have struggled to make another one that works. Until now, with a new and improved design (with fill zones and GND, yay!)
Check out the full journey of making these adapters:
- https://amiga.technology/2021/03/21/all-good-things/
- https://amiga.technology/2021/02/25/finding-common-gnd/
- https://amiga.technology/2021/01/18/68040-to-68060-upformation/
NOTE: This adapter is based on the design by richx, which is based on the design by Mozart, Lemmy and Matze from the a1k.org forum (https://eab.abime.net/showthread.php?t=100942). This version is easier and cleaner to build.
68040-to-68060 adapter
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(5)
More by Stefan Reinauer
-
68040-to-68060 adapter
The one thing that is more rare than 68060 CPUs is Amiga accelerator boards for the 68060 CPUs (espe...
-
74xxx TSSOP-14 to DIP-14 adapter
Can’t find that 74xxx part in DIP-14 but there’s a TSSOP-14 available? This little adapter will help...
-
ReAmiga 4091 SCSI-2 Host Controller
A brand new Zorro III SCSI-2 Controller for your AmigaFacts: Fast SCSI-II (10MB/s max) controller fo...
-
Amiga 4000 ROMY Rev 3b
This is a new release of the Amiga 4000 ROMY.
-
Paula Interrupt Adapter (A500/A2000)
Just start HRTMon from your startup-sequence, or make a custom Kickstart with HRTMon as a module and...
-
Amiga Boot Selector
This is a redesign of the Amiga Boot Selector by Jussi Kilpelainen. It's slightly smaller than the o...
-
DS1000 Delay Line Adapter
Ever tried to update that broken Dallas DS1000 delay line on your Amiga A3640 accelerator? Or wanted...
-
novOSC - new oscillators in old iron
This project lets you use SMD ocillators on old iron like Amiga computers.Check out my blog at https...
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
71 0 0 -
-
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
120 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
413 0 1 -
Custom Mechanic Keyboard - STM32
239 0 3
