Stefan Reinauer
UNITED STATES OF AMERICA • + Follow
Description
Amiga Boot Selector
This is a redesign of the Amiga Boot Selector by Jussi Kilpelainen. It's slightly smaller than the original.
Check GitHub Link on the right for KiCAD files, BOM etc. Also take a look at my blog at https://www.amiga.technology/
Code
https://github.com/reinauer/Amiga-Boot-Selector
Schematic and Layout
https://amiga.technology/
Mar 16,2021
2,785 views
Amiga Boot Selector
2 Layers PCB 57.4 x 20.6 mm FR-4, 1.2 mm, 1, HASL with lead, Red Solder Mask, White silkscreen
Slim line version of the Amiga Boot Selector
2785
6
0
Published: Mar 16,2021
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(6)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Stefan Reinauer
-
68040-to-68060 adapter
The one thing that is more rare than 68060 CPUs is Amiga accelerator boards for the 68060 CPUs (espe...
-
74xxx TSSOP-14 to DIP-14 adapter
Can’t find that 74xxx part in DIP-14 but there’s a TSSOP-14 available? This little adapter will help...
-
ReAmiga 4091 SCSI-2 Host Controller
A brand new Zorro III SCSI-2 Controller for your AmigaFacts: Fast SCSI-II (10MB/s max) controller fo...
-
Amiga 4000 ROMY Rev 3b
This is a new release of the Amiga 4000 ROMY.
-
Paula Interrupt Adapter (A500/A2000)
Just start HRTMon from your startup-sequence, or make a custom Kickstart with HRTMon as a module and...
-
Amiga Boot Selector
This is a redesign of the Amiga Boot Selector by Jussi Kilpelainen. It's slightly smaller than the o...
-
DS1000 Delay Line Adapter
Ever tried to update that broken Dallas DS1000 delay line on your Amiga A3640 accelerator? Or wanted...
-
novOSC - new oscillators in old iron
This project lets you use SMD ocillators on old iron like Amiga computers.Check out my blog at https...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
