|
|
WEMOS-D1-MINI |
x 1 | |
|
|
XH2.54-2P-R |
x 1 | |
|
|
Slide Switch 1P2T |
x 1 | |
|
|
8 pin female header |
x 3 |
|
arduino IDEArduino
|
|
|
PCB Holder |
|
|
Soldering iron |
7-segment NTP clock on four OLED display - Part. 2
7 SEGMENT CLOCK ON OLED DISPLAYS - PART 2
This project was developed together with a friend and is very well presented here:
https://nicuflorica.blogspot.com/2023/05/alt-ceas-ntp-cu-cifre-din-7-segmente-pe.html
My friend came up with the idea, drew the scheme, wrote the sketch, printed the case and performed the final assembly and my contribution was the design and realization of the PCBs, the design of the case elements.
This project has three parts:
- PCB for WEMOS D1 Mini, this project
- PCB for the 4 OLEDs, you can find the project here:
- The elements of the case - 3D printing project, you can find it here:
To realize the entire project, all the components described in the three projects above must be used.
The clock works very well and is very accurate because it is permanently connected to an NTP server. There is the possibility of setting winter or summer time, as you wish, by activating a switch on the back of the case. Powering the watch can be done with any 5V DC source, but it works very well with a mobile phone charger.
You can find my friend's projects here:
https://www.pcbway.com/project/member/?bmbno=4A13841B-D98A-40
7-segment NTP clock on four OLED display - Part. 2
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(2)
More by Georgel zvonacfirst
-
7-segment NTP clock on four OLED display - Part. 1
7 SEGMENT CLOCK ON OLED DISPLAYS - PART 1This project was developed together with a friend and is ve...
-
7-segment NTP clock on four OLED display - Part. 2
7 SEGMENT CLOCK ON OLED DISPLAYS - PART 2This project was developed together with a friend and is ve...
-
7-segment NTP clock on four OLED display - Part. 3
7 SEGMENT CLOCK ON OLED DISPLAYS - PART 3This project was developed together with a friend and is ve...
-
Atmega328 digital panel meter volt ammeter
The panel voltmeter that is the subject of this project was developed as a personal necessity.Instea...
-
Electronic Active Dummy Load_PCB1/2 (Analog Board)
Note: this project should be used together with the project :https://www.pcbway.com/project/sharepro...
-
Electronic Active Dummy Load_PCB2/2 (Logic Board)
Note: this project should be used together with the project Electronic Active Dummy Load PCB_1/2 (An...
-
2.1 Amplifier Board with TDA7377
SMALL AMPLIFIER TDA7377 of 15W + 15W + 30WI have developed an amplifier with the following character...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
111 0 0 -
DIY Laser Power Meter with Arduino
162 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
155 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
555 0 2
