ATtiny13A breakout PCB
A tiny microcontroller PCB based on ATtiny13A, 5xIOs, 3 of those IO connects to ADC. This board is perfect for all the small, simple project where an Arduino is overkill.
Onboard 5V LDO has low quiescent current. If powered by battery, the LDO and LED can be omitted where possible, with the lowest power sleep setting this board will only draw 500nA.
Programming has to be done via AVR ICSP interface. With limited FLASH and RAM Arduino bootloader isn't an option, therefore coding must be done in Microchip/Atmel studio.
ATtiny13A breakout PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
Log in to post comments.
More by Henry Huang
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1007 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
544 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1277 4 2 -
How to measure weight with Load Cell and HX711
765 0 3
