Camputers Lynx ATX PSU
The Camputers Lynx is a rare UK 8-bit Micro. One of the first things that seem to go, or be lost, is the official PSU. So this board will allow you to replace it with an ATX PSU. Specifically, it's been designed to fit a PICO ATX board and maintain a nice squared shape, perfect for putting in a project box.
LED and FAN are optional, but obviously handy if you do stick it in a box.
The diagram on the board is the pinout of the Camputers power port as seen from the back of the machine, and the numbers correspond to the numbers on the output pins.
Whilst this is designed for the Camputers Lynx it can obviously be used by anything that needs +12v, +5v and -5V.
Here's a video showing the board being used https://youtu.be/KNNNewyvnC8
Camputers Lynx ATX PSU
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
Log in to post comments.
More by Johnny Blanchard
-
-
-
Modifying a Hotplate to a Reflow Solder Station
565 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
330 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
800 4 2 -
How to measure weight with Load Cell and HX711
570 0 3
