Edoardo kinmami
JAPAN • + Follow
Description
Commodore Amiga 500 IDE HD LED Hard Disk
Amiga 500 Floppy Drive LED can also blink when the internal HDD is active.
To wire from PIN39 of HDD to the board.
It can use either THT and SMT BJT.
It requires a female and a male header pin (8).
Very compact design.
Tested on Rev5, 6, 8.1.
May 21,2021
2,447 views
Commodore Amiga 500 IDE HD LED Hard Disk
The internal solution to connect the active-low signal of the CF-IDE 44 adapter (or equivalent) to the keyboard connector.
2447
12
0
Published: May 21,2021
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
- Comments(0)
- Likes(12)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Edoardo kinmami
-
Commodore AMIGA PSU USB-C Power Sink Delivery Supply High Efficiency Triple Output 5V ±12V OLED ATARI ST shark
Compact design for high efficiency (>90%) USB-C Power Supply for Amiga 500, 600, 1200.71 x 34 mm,...
-
Commodore AMIGA LED 500 600 1200 2000 status board multi system for debugging and troubleshooting hardware
A LED status PCB to connect A500, A600, A1200, A2000 motherboards for troubleshooting purposes witho...
-
Commodore MAX Machine RF modulator replacement S-VIDEO bypass
Inspired by projects from c0pperdragon, mbarszcz-pcb, tebl and VGP.It fits the commodore MAX MACHINE...
-
Enhanced Flash Floppy Drive Plus (internal) with push-buttons gotek
Enhanced Flash Floppy Drive Plus Improved Gotek for Commodore Amiga (internal and external), Atari, ...
-
Commodore Amiga DB23 RGB VGA External Video Buffer (V6) Compatible with GBS-8200 8220 OSSC No Jail bars
External RGB video adapter from DB-23 female (input) to DE-15F (output, VGA) for Amiga computers.Com...
-
74FCT646 74F646S 24 SOIC DIL AMIGA 3000 COMMODORE SOCKET ADAPTER SMT THT
An adapter to mount SMT 74FCT646 onto 24-DIL socket
-
ATARI ST / STE RGB to VGA video Adapter with AV RCA JACK V2
Smart Solution for a Multisync Video Switch for Atari ST/STEAtari DIN13 to VGA3.5mm A/V jack connect...
-
Commodore Plus/4 64 128 VIC20 Stock Power Supply High Efficiency Low Noise 5V 9VAC Replacement V2
It replaces the internal board with a high-efficiency, high-current capability, low noise, fully pro...
-
PCE_Expansion_Adapter_PCB
License: CERN-OHL-S-2.0Original author and credits: Jaakko Oranenhttps://codeberg.org/CBMretro/PC_En...
-
PCE_DIN_Adapter_PCB
License: CERN-OHL-S-2.0Original author and credits: Jaakko Oranenhttps://codeberg.org/CBMretro/PC_En...
-
Commodore VIC 20 MOS 6560 / 6561 Audio Video Booster Adapter
This solution improves audio and video quality by reducing noisy signals.It requires extensive modif...
-
PS/2 Mouse adapter Commodore 64 128 1351 hardware emulation C64 C128 computer serial GEOS
Original project https://github.com/svofski/mouse1351/Revised firmware by Alfred Eenkhoorn.compact d...
-
Repairing the Commodore 1351 Mouse C64 C128
Based on the work of Tom Lokovic http://monkeyspeak.com/1351/repair.htmlCredits & photos belongs...
-
MiniDIN9-SegaMD2-RFModulator2_Panasonic 3DO FZ-1 FZ-10 RF Modulator replacement for RGB modification
MiniDIN9-SegaMD2-RFModulator2_Panasonic 3DO FZ-1 FZ-10 RF Modulator replacement for RGB modification...
-
MiniDIN9-SegaMD2-RFModulator1Panasonic 3DO FZ-1 FZ-10 RF Modulator replacement for RGB modification
to be used with https://www.pcbway.com/project/shareproject/Mini_DIN_9_RGB_Video_Output_adapter_Sega...
-
Mini DIN 9 RGB Video Output adapter Sega Mega Drive Genesis 2 pinout for video mod Panasonic 3DO
A board for building a video port adapter based on the Mini DIN 9 and Sega Mega Drive (Genesis) 2 pi...
-
VP536A RGB Video Adapter for Panasonic REAL 3DO FZ-1 FZ-10 console V2
Based on the projects of http://dansprojects.com/, Taijigamer2, Doujindance.RGB Video Adapter for Pa...
-
PCE_Amp_PC Engine RGB and Audio Amp
License: CERN-OHL-S-2.0Original author and credits: Jaakko Oranenhttps://codeberg.org/CBMretro/PC_En...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
